Where in the forum is?

December 12, 2001, 11:40

I looked for the thread on the discussion about fluent but could not find it. I want to discuss it with some other fluent users.

Can anybody tell me where is it?

I'm pretty sure there is no censorship in this forum.

December 12, 2001, 11:46

http://www.cfd-online.com/Forum/fluent.cgi

December 13, 2001, 22:01

I asked for the Fluent thread in this discussion forum in which the discussion centrated about the low performance of fluent.

Thnx.

cfd_learner

December 13, 2001, 22:59

"Is this the end for Fluent"

http://www.cfd-online.com/Forum/main...cgi?read=19685

That one?

December 13, 2001, 23:03

Yes, I wasn't able to find it

Thanx axel

Newbie

December 14, 2001, 18:44

If you read this thread in the archives now you shouldn't miss the three comments added recently by Mark Christon, who was one of the organizers for the event referred to. Mark's comments have not been archived yet so you can find them on this active part of the forum. Here are three links to them:

http://www.cfd-online.com/Forum/main.cgi?read=20129

http://www.cfd-online.com/Forum/main.cgi?read=20130

http://www.cfd-online.com/Forum/main.cgi?read=20131

December 17, 2001, 20:31

thanks I was missing them.

December 12, 2001, 11:40	Where in the forum is?	#1
cfd_learner Guest Posts: n/a	I looked for the thread on the discussion about fluent but could not find it. I want to discuss it with some other fluent users. Can anybody tell me where is it? I'm pretty sure there is no censorship in this forum.

December 12, 2001, 11:46	Re: Where in the forum is?	#2
Tom Brown Guest Posts: n/a	http://www.cfd-online.com/Forum/fluent.cgi

December 13, 2001, 22:01	Re: Where in the forum is?	#3
cfd_learner Guest Posts: n/a	I asked for the Fluent thread in this discussion forum in which the discussion centrated about the low performance of fluent. Thnx. cfd_learner

December 13, 2001, 22:59	Re: Where in the forum is?	#4
Axel Rohde Guest Posts: n/a	"Is this the end for Fluent" http://www.cfd-online.com/Forum/main...cgi?read=19685 That one?

December 13, 2001, 23:03	Re: Where in the forum is?	#5
newbie Guest Posts: n/a	Yes, I wasn't able to find it Thanx axel Newbie

December 14, 2001, 18:44	Re: Where in the forum is?	#6
Jonas Larsson Guest Posts: n/a	If you read this thread in the archives now you shouldn't miss the three comments added recently by Mark Christon, who was one of the organizers for the event referred to. Mark's comments have not been archived yet so you can find them on this active part of the forum. Here are three links to them: http://www.cfd-online.com/Forum/main.cgi?read=20129 http://www.cfd-online.com/Forum/main.cgi?read=20130 http://www.cfd-online.com/Forum/main.cgi?read=20131

December 17, 2001, 20:31	Re: Where in the forum is?	#7
cfd_learner Guest Posts: n/a	thanks I was missing them.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Discussion Forum Launched	pete	Site News & Announcements	0	March 15, 2009 14:55
New ANSYS forum structure, what do you think?	Peter	FLUENT	10	February 6, 2009 04:07
New ANSYS forum structure, what do you think?	Peter	CFX	5	February 4, 2009 11:59
New forum software preview	Peter	Main CFD Forum	3	February 2, 2009 19:50
Switching Forum Software, Opinions Wanted	Jonas Larsson	Main CFD Forum	42	December 23, 2008 04:34