CFD Online Logo CFD Online URL
Home > Forums > Main CFD Forum

How to implement block-to-block B.C?

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 20, 2002, 22:43
Default How to implement block-to-block B.C?
Posts: n/a
Dear everyone:

I want to write a program dealing with multiblock,but I don't known how to implement block-to-block B.C,especially when two block have different grids.

All comments are much appreciated!
  Reply With Quote

Old   January 21, 2002, 10:18
Default Re: How to implement block-to-block B.C?
Li Yang
Posts: n/a
Hello Zhao,

You can firstly generate two layers of ghost cells on every boundaries for each block. After that, what you need is to get the information for those halo cells from other blocks by either interpolation or transformation.

Good luck

  Reply With Quote

Old   January 21, 2002, 12:33
Default Re: How to implement block-to-block B.C?
Posts: n/a
or go straight to unstructured index addressing in your code so that there is nor boundary between blocks at all - there are just like any other internal cell faces even if they not not matched one-by-one.
  Reply With Quote

Old   February 13, 2002, 16:59
Default Re: How to implement block-to-block B.C?
Márcio Ricardo Pivello
Posts: n/a
This is surely the simplest solution. But, besides the quadrilateral elements obtained, what advantages will I have if I use this kind of connectivity?
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
FOAM FATAL ERROR: Inconsistent number of faces blockMesh::createMergeList() line 193 Hengel OpenFOAM Native Meshers: blockMesh 6 December 30, 2015 22:21
[ICEM] Quest for seemingly simple Blocking (degenerate block) la7low ANSYS Meshing & Geometry 0 July 12, 2011 19:48
Icem Mesh to Foam jphandrigan OpenFOAM Mesh Utilities 4 March 9, 2010 03:58
blockMesh: block with 6 vertexes dani OpenFOAM 3 June 25, 2009 13:13
How to implement B.C. for outlet boundary? Hai-Wen Ge Main CFD Forum 1 November 3, 2001 09:50

All times are GMT -4. The time now is 17:35.