CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Ratio of specific heats

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 12, 1999, 18:44
Default Ratio of specific heats
  #1
jay
Guest
 
Posts: n/a
Folks,

Can anyone tell me the value of gamma (Cp/Cv) for:

Ammonia (NH3), and Carbon Dioxide (CO2) and Carbon Monoxide (CO)

Thanks in advance.

-Jay
  Reply With Quote

Old   January 12, 1999, 23:06
Default Re: Ratio of specific heats
  #2
Glenn Horrocks
Guest
 
Posts: n/a
Jay,

The gamma for: CO2 = 1.289 CO = 1.400 (at 300K)

From Fundamentals of Classical Thermodynamics by Van Wylan & Sonntag.

I don't seem to be able to find NH3. Its Cp is 2.158 kJ/kgK at 300K, that's the best I can do. (From Fundamentals of Heat and Mass Transfer by Incropera and De Witt)

Maybe try the SI Chemical Data Book?

Regards, Glenn
  Reply With Quote

Old   January 13, 1999, 04:40
Default Re: Ratio of specific heats
  #3
Jens I. Madsen
Guest
 
Posts: n/a
I could not find the ratio of specific heats (gamma) for NH3 in a table either, but the value is easily deductable if you recall your basic thermodynamics:

R= Cp-Cv gamma = Cp/Cv

Combining these expressions, gamma can be computed from quantities that I did find, namely those for Cp and R.

gamma = Cp/(Cp-R) Cp = 2219 J/kgK (at 20 deg. Celsius) R = 488,3 J/kgK

=> gamma = 1.28

Table values where taken from "Bosnjakovic: Technische Thermodynamik"
  Reply With Quote

Old   January 13, 1999, 09:50
Default Re: Ratio of specific heats
  #4
jay
Guest
 
Posts: n/a
Glenn and Jens,

Many thanks for your replies, and for the references both of you provided.

Best,

-Jay.

  Reply With Quote

Old   January 13, 1999, 11:20
Default Re: Ratio of specific heats
  #5
Erwin Platvoet
Guest
 
Posts: n/a
Ratio of specific heats

ammonia = 1.310 carbon dioxide = 1.304 carbon monoxide = 1.404

at 15 deg.C and 1 atm.

Source: Perry's Chem. Eng. Handbook, table 3-185
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 05:21
pressure eq. "converges" after few time steps maddalena OpenFOAM Running, Solving & CFD 69 July 21, 2011 07:42
Constant velocity of the material Sas CFX 15 July 13, 2010 08:56
temperature-dependant specific heats ratio morteza08 Main CFD Forum 0 June 19, 2010 13:03
Time-dependent specific heats ratio morteza08 Main CFD Forum 0 June 19, 2010 13:00


All times are GMT -4. The time now is 04:25.