 |
 |
 |
|
|
|
[Sponsors] | ||||
December 10, 2002, 03:55
|
mould flow in casting process
|
#1 |
|
Guest
Posts: n/a
|
I would like to use CFD method to simulate the flow of molten metal in the mould of casting process, such as sand casting.
As you know, the mould has inlet(s), called gates, but no outlet. The molten metal will flow to fill up the mold. I want to analyse the problem in 2D. What CFD technique is suitable for me? The flow is incompressible and viscous and unsteady. If you do have source code, can you email me for reference? Thanks. |
|
|
||
|
December 10, 2002, 18:20
|
Re: mould flow in casting process
|
#2 |
|
Guest
Posts: n/a
|
There have been extensive research on this area using VOF. Try to search with these key words: CFD+VOF+cast*/mould*
You should be able to get plenty of references. CFD MAN |
|
|
|
||
|
December 10, 2002, 21:13
|
Re: mould flow in casting process
|
#3 |
|
Guest
Posts: n/a
|
what is VOF ?
|
|
|
|
||
|
December 11, 2002, 00:43
|
Re: mould flow in casting process
|
#4 |
|
Guest
Posts: n/a
|
Its a free surface modeling technique. Stands for volume of fluid.
CFD MAN |
|
|
|
||
|
December 18, 2002, 09:37
|
Re: mould flow in casting process
|
#5 |
|
Guest
Posts: n/a
|
The group of Douglas Kothe at Los Alamos National Laboratory is working in this area. You can search in their website. They also use the VOF method.
regards, chidu... |
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Flow meter Design | CD adapco Group Marketing | Siemens | 3 | June 21, 2011 08:33 |
| gasification process in an entrained flow gasifier | abiyik67 | FLUENT | 0 | August 17, 2009 02:32 |
| Plug Flow | Franck | Main CFD Forum | 3 | September 4, 2003 05:57 |
| Help: Poiseulle flow benchmariking | Mohammad Kermani | Main CFD Forum | 1 | November 12, 1999 16:15 |
| Casting Process Simulation | Anil Shenoy | Main CFD Forum | 1 | February 22, 1999 11:56 |
Linear Mode
