fit a great number of point with Bezier spline

April 18, 2003, 00:37

Hi,every one, I need a fortran or c subroutine which can fit a great number of points(such as those describe a airfoil) with Bezier spline curves. Who can help me? Thanks!

ji

April 18, 2003, 05:13

I have found the free routines by Paul Dierckx to be excellent. You can download them from here:

http://www.netlib.org/dierckx/

Netlib also has a whole bunch of other similar routines which might help you if Dierckx´s routines are not what you are looking for. Here is a direct link to a search for spline routines on netlib:

http://www.netlib.org/cgi-bin/search...ang=;startat=1

April 18, 2003, 10:41

Hi there,

Try numerical recipes: The free online web source can be found at.

http://www.nr.com/

Regards James

April 20, 2003, 20:22

Hi,Thanks lots for Jonas and James's great helps

Regards

ji

April 18, 2003, 00:37	fit a great number of point with Bezier spline	#1
JLUCHENG Guest Posts: n/a	Hi,every one, I need a fortran or c subroutine which can fit a great number of points(such as those describe a airfoil) with Bezier spline curves. Who can help me? Thanks! ji

April 18, 2003, 05:13	Re: fit a great number of point with Bezier spline	#2
Jonas Larsson Guest Posts: n/a	I have found the free routines by Paul Dierckx to be excellent. You can download them from here: http://www.netlib.org/dierckx/ Netlib also has a whole bunch of other similar routines which might help you if Dierckx´s routines are not what you are looking for. Here is a direct link to a search for spline routines on netlib: http://www.netlib.org/cgi-bin/search...ang=;startat=1

April 18, 2003, 10:41	Re: fit a great number of point with Bezier spline	#3
James Date Guest Posts: n/a	Hi there, Try numerical recipes: The free online web source can be found at. http://www.nr.com/ Regards James

April 20, 2003, 20:22	Re: fit a great number of point with Bezier spline	#4
JLUCHENG Guest Posts: n/a	Hi,Thanks lots for Jonas and James's great helps Regards ji

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Upgraded from Karmic Koala 9.10 to Lucid Lynx10.04.3	bookie56	OpenFOAM Installation	8	August 13, 2011 04:03
DecomposePar unequal number of shared faces	maka	OpenFOAM Pre-Processing	6	August 12, 2010 09:01
can the spline fit the two dimensional field	ztdep	Main CFD Forum	1	February 26, 2006 15:41
CFX4.3 -build analysis form	Chie Min	CFX	5	July 12, 2001 23:19
Point Data -> Spline -> Iges	Tim Franke	Main CFD Forum	1	July 6, 2000 12:14