|
[Sponsors] |
March 6, 1999, 07:06 |
Rotating frames for Turbomachine
|
#1 |
Guest
Posts: n/a
|
Hello, I am looking for litreture on rotating frames for rotor stator interaction of turbo machines. I precisely want to know how we will calculate the fluxes at the block interface, when one block is moving and other stationary. I am using multiblock algorithm and using cartesian coordinate system instead of cylindrical coordinates. Please guide me on the above problem, I have gone through a lot of Papers, but I could not get the information about inteface flux calculation. Please also guide me on the numbering of the blocks when pitch is notsame for stator & rotor.
|
|
March 8, 1999, 12:42 |
Re: Rotating frames for Turbomachine
|
#2 |
Guest
Posts: n/a
|
(1). for steady state 3-D, look under J.D. Denton or W.N. Dawes in ASME paper or Journal of Turbomachinery, (2). for transient 3-D, look for papers from NASA/Ames or NASA/Lewis research laboritories,(3). some commercial codes may have options to deal such boundary conditions. (4) it is a very specific problem and you need to find the right papers. But, the above two types of conditions are fairly common in multi-stage turbomachinery calculations. ( don't ask me for the details) By the way, you can also look into VKI publications.
|
|
March 15, 1999, 04:19 |
Re: Rotating frames for Turbomachine
|
#3 |
Guest
Posts: n/a
|
Hi,
These two papers might be of interest... Perng, Murthy , 'A sliding mesh technique for simulation of flow in mixing tanks', Proc. ASME Winter Annual Meeting, New Orleans, 1993, pp 1-9. Arnone, Pacciani, Sestini, 'Multigrid computations of unsteady rotor stator interaction using the Navier-Stokes equations', J. Fluid Engng., 117, pp 647-652 (1995). Regards, franck |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rotating Impeller | Naith | FloEFD, FloWorks & FloTHERM | 22 | November 5, 2012 08:53 |
Multiple Rotating Reference Frames for autoclave | multiphase-flow | FLUENT | 1 | June 22, 2008 21:25 |
Cart3D and Rotating Frames | hermann | CFX | 0 | February 6, 2006 14:26 |
Rotating ref frames | SDEPMEC | Siemens | 1 | July 12, 2001 03:01 |
Rotating Frames | Tom | Main CFD Forum | 8 | May 13, 1999 10:05 |