CFD Online Logo CFD Online URL
Home > Forums > Main CFD Forum

Boundary conditinos in PHOENICS

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 7, 1999, 04:13
Default Boundary conditinos in PHOENICS
Abdul Hafid Elfaghi
Posts: n/a
I am doing a simulation on turbine blade heat transfer using PHOENICS. could any one tell me how to write these boundary conditions using PHOENICS Input Language (PIL) commands group (13)

The boundary conditions are: -

Inlet: -

Total temperature(K): 409.2 Total inlet pressure (bar):0.822 Mach number: 0.15 Reynolds number 1.2048E+5 Temperature (K) 407.37 Pressure (bar) 0.809 Density (kg/m**3) 0.692 Velocity (m/s) 60.70 Dynamic viscosity(kg/m.s) 2.3581E-05 Kinematic viscosity (m2/s) 3.4079E-05

Outlet: -

Mach number: 1.135 Reynolds number: 5.4770E+5 Temperature (K): 325.37 Pressure (bar): 0.369 Density (kg/m**3): 0.395 Velocity (m/s): 410.45 Dynamic viscosity (kg/m.s): 2.000E-05 Kinematic viscosity (m2/s): 5.0696E-05

Wall temperature (k): 301.95 Free stream turbulence 6.0 %

Thank you in advanca
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 48 October 25, 2017 06:07
Implementation of boundary conditions for FVM Tom Main CFD Forum 7 August 26, 2014 05:58
inlet velocity boundary condition murali CFX 5 August 3, 2012 08:56
Boundary conditions? Tom Main CFD Forum 0 November 5, 2002 02:54
Boundary Conditions Jan Ramboer Main CFD Forum 11 August 16, 1999 08:59

All times are GMT -4. The time now is 08:42.