An example code for SIMPLE

July 4, 2003, 20:57

Could anyone please give some open codes for SIMPLE or SIMPLER as an example for me to learn it? Many thanks!

Georege

July 5, 2003, 05:22

Respected sir:

I also want the same, can you please let me inform as soon as you ghet the same

amit r patel

July 5, 2003, 06:22

Here is one good code

ftp://ftp.springer.de/pub/technik/peric/

July 5, 2003, 18:43

If you would like a piece of C++ with a simple-to-understand top level which will make it easy to stody top-level algorithms like SIMPLE and PISO, have a look at FOAM: http://www.nabla.co.uk

The code is commercial but academic licences are granted free of charge. It is available on UNIX and Linux platforms (no Microsoft!) and all top level example codes are provided in source. For details and capabilities, see the web site.

July 6, 2003, 05:34

Thank you very much. Would you please tell me the related textbookds?

July 6, 2003, 08:06

'Computational Methods for Fluid Dynamics' by Joel H. Ferziger & Milovan Peric' 2nd Revised Edition w/additional corrections as depicted in the referenced source code.

July 6, 2003, 16:54

i have a complete program for solving the combined free and forced convection in a semicircular duct with simpler aLogarithm

July 4, 2003, 20:57	An example code for SIMPLE	#1
George Pek Guest Posts: n/a	Could anyone please give some open codes for SIMPLE or SIMPLER as an example for me to learn it? Many thanks! Georege

July 5, 2003, 05:22	Re: An example code for SIMPLE	#2
Amit_R_Patel Guest Posts: n/a	Respected sir: I also want the same, can you please let me inform as soon as you ghet the same amit r patel

July 5, 2003, 06:22	Re: An example code for SIMPLE	#3
cfd user Guest Posts: n/a	Here is one good code ftp://ftp.springer.de/pub/technik/peric/

July 5, 2003, 18:43	Re: An example code for SIMPLE	#4
Dr. Hrvoje Jasak Guest Posts: n/a	If you would like a piece of C++ with a simple-to-understand top level which will make it easy to stody top-level algorithms like SIMPLE and PISO, have a look at FOAM: http://www.nabla.co.uk The code is commercial but academic licences are granted free of charge. It is available on UNIX and Linux platforms (no Microsoft!) and all top level example codes are provided in source. For details and capabilities, see the web site.

July 6, 2003, 05:34	Re: An example code for SIMPLE	#5
George Pek Guest Posts: n/a	Thank you very much. Would you please tell me the related textbookds?

July 6, 2003, 08:06	Re: An example code for SIMPLE	#6
John Guest Posts: n/a	'Computational Methods for Fluid Dynamics' by Joel H. Ferziger & Milovan Peric' 2nd Revised Edition w/additional corrections as depicted in the referenced source code.

July 6, 2003, 16:54	Re: An example code for SIMPLE	#7
yousef elhassadi Guest Posts: n/a	i have a complete program for solving the combined free and forced convection in a semicircular duct with simpler aLogarithm

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
The FOAM Documentation Project - SHUT-DOWN	holger_marschall	OpenFOAM	242	March 7, 2013 12:30
How to make code run in parallel?	cwang5	OpenFOAM Programming & Development	1	May 30, 2011 04:47
Open Source Vs Commercial Software	MechE	OpenFOAM	28	May 16, 2011 11:02
Small 3-D code	Zdravko Stojanovic	Main CFD Forum	2	July 19, 2010 10:11
public CFD Code development	Heinz Wilkening	Main CFD Forum	38	March 5, 1999 11:44