|
[Sponsors] |
Tets and k-e model for unsteady turbulence flows |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
Guest
Posts: n/a
|
For complicate geometries, it seems these combinations did not work well. Some Auto-HEx mesh generator can only replace 10% of tets for my geometries. Any mesh generator can generate HEX meshes semi-automatically and later can be fixed it manaully? Thanks!
|
|
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|