CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Compressible laminar boundary layer

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 21, 2003, 14:55
Default Compressible laminar boundary layer
  #1
Pierre Ricco
Guest
 
Posts: n/a
I wrote this code which gives the disturbances of velocity and temperature on top of the steady flow, which is a steady laminar boundary layer with no pressure gradient (basically Blasius but with energy equation coupled). The code is parabolic and I am marching downstream from initial profiles. Variables are complex (also the BC) in the free-stream.

Everything is fine for Mach number smaller than 2.5, for higher ones the code blows up. Do you please have any suggestions for parabolic system with COMPLEX BC?

Thanx a lot!
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Boundary Layer Question scottneh STAR-CCM+ 3 September 30, 2010 15:21
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55
Laminar or tubulent Boundary layer? Rodrigo Madariaga FLUENT 1 January 23, 2003 21:41
help for Gambit: 2 edges + 1 boundary layer Peter FLUENT 0 August 9, 2002 20:41
boundary layer of a flat-plate dwi s Main CFD Forum 1 November 9, 2000 02:45


All times are GMT -4. The time now is 10:28.