CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Main CFD Forum (https://www.cfd-online.com/Forums/main/)
-   -   oxygen flow rate (https://www.cfd-online.com/Forums/main/6399-oxygen-flow-rate.html)

lwhan July 31, 2003 07:38
oxygen flow rate
 
would some body tell me how much flow rate is safe in the pipe?

lwhan July 31, 2003 11:03
Re: oxygen flow rate
 

Alton Reich, PE August 4, 2003 13:39
Re: oxygen flow rate
 
Iwhan,

By "safe" I'm going to assume that you are looking at the question from a structural integrity stand point. That is actually not a question for CFD folks. The structural integrity of piping systems is governed by the ASME Pressure Vessel and Piping Code (adopted as a standard in Taiwan).

For air piping, you will probably want ASME B31.3 which governs process piping. In some special cases the ASME Boiler and Pressure Vessel Code, Section 3 or Section 8, should be used. If you're unclear which code to use, consult an expert.

Regards, Alton


All times are GMT -4. The time now is 17:43.