CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Fluid pairs

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 10, 2009, 14:47
Default Fluid pairs
  #1
New Member
 
Francisca
Join Date: Jun 2009
Posts: 14
Rep Power: 16
fjalil is on a distinguished road
Hello. I'm doing a simulation on CFX. My case is distribution box, or a kind of launder, that has one input and 3 outputs. It's isothermal and transient. I have three phases involved: water, air, and particles. The water transports the particles, and the air is above. I did my case already with water and air, and it was OK. The thing is that now, I'm not sure about the fluid details and the fluid pairs. My questions are the following:

1. For the particle phase, in fluid details-morphology, I put dispersed fluid. This is because I want to use an Eulerian-Eulerian model. If I put dispersed solid I'm I using Lagrangian method?

2. For fluid pairs, for the pair water-particles, under interphase transfer I only have the options of free surface or particle model. Does particle model mean I'm using Lagrangian particle tracking?

3. In fluid pairs, under interphase transfer, for water-air I used free surface. I'm not sure what the difference is between this and mixture model.

4. In fluid pairs, under interphase transfer, for particle-air I used free surface. I'm not sure if this is OK, because the particle phase should carried by the liquid, and I don't know what interaction should it have with the air. Is free surface OK?

Thank you very much.

Francisca
fjalil is offline   Reply With Quote

Reply

Tags
cfx, cfx 11, cfx11.0, multiphase

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Error message: Insufficient Catalogue Size Paresh Jain CFX 32 February 3, 2021 04:37
How to apply negtive pressure to outlet bioman66 CFX 5 June 3, 2006 02:40
Intl Conf Computational Methods in Fluid Power Jacek Stecki Main CFD Forum 0 November 10, 2002 06:49
My Revised "Time Vs Energy" Article For Review Abhi Main CFD Forum 2 July 9, 2002 10:08
Terrible Mistake In Fluid Dynamics History Abhi Main CFD Forum 12 July 8, 2002 10:11


All times are GMT -4. The time now is 20:39.