|
[Sponsors] |
September 4, 2003, 05:49 |
Sharp angle in Emmersed Boundary
|
#1 |
Guest
Posts: n/a
|
When apply the emmersed boundary method (which is like cartesian grid method) in flow around a rigid body, some layers of nodes in the solid body should be extrapolated from nodes in the fluid domain with non-slip condition.
For smooth wall, there is no problem. But if there are sharp angle on the wall, how to process this case? When solving Euler equation only on cartesian grid, without near-wall fitted grid, this case should be faced, too, such as the tail of a foil. Then how to ? What papers should I read?? Thanks |
|
September 10, 2003, 07:58 |
Re: Sharp angle in Emmersed Boundary
|
#2 |
Guest
Posts: n/a
|
Even though your work is on Navier-Stokes, the below paper on Euler flows justifies the blunting procedure.
A Cartesian Grid Approach with Hierarchical Refinement for Compressible Flows by James J Quirk, Institute for Computer Applications in Science and Engineering (ICASE), 1994. available for download from http://citeseer.nj.nec.com/james94cartesian.html Grab the PS file as the PDF conversion is pathetic for on-screen reading though good for printing. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Implementation of boundary conditions for FVM | Tom | Main CFD Forum | 7 | August 26, 2014 06:58 |
External Radiation Boundary Condition for Grid Interface | CFD XUE | FLUENT | 0 | July 9, 2010 03:53 |
External Radiation Boundary Condition (Two sided wall), Grid Interface | CFD XUE | FLUENT | 0 | July 8, 2010 07:49 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 05:15 |
Boundary conditions? | Tom | Main CFD Forum | 0 | November 5, 2002 02:54 |