CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Recover the Solver data

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 23, 2020, 09:29
Default Recover the Solver data
  #1
Member
 
Meysam
Join Date: Dec 2019
Posts: 77
Rep Power: 6
MNMK is on a distinguished road
Hi,

My solver hung after 195. Iteration. In my Cfx folder, I see just the Out.file and below files see photo: 2.PNG

also, I can see my cluster is working, even I have closed the Workbench, See photo:
1.PNG

Can I recover my solver data and produce the res.file? or How can I start the Solver through the actuall data ?( with Out.file and etc...)
MNMK is offline   Reply With Quote

Old   September 23, 2020, 09:35
Default
  #2
Senior Member
 
Join Date: Jun 2009
Posts: 1,785
Rep Power: 31
Opaque will become famous soon enough
Unfortunately not. There is nothing left in that photo that contains any useful data.

It is probably best to add an automatic backup file every 50/100 iterations just in case it happens again.

You have to start the simulation once again.
__________________
Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.
Opaque is offline   Reply With Quote

Old   September 23, 2020, 09:38
Default
  #3
Senior Member
 
karachun's Avatar
 
Join Date: Nov 2015
Posts: 244
Rep Power: 11
karachun is on a distinguished road
Do you set CFX to write backup files? Look like no. Search *.bak files in the working folder. If you find this file you can rename it to .res and use as result file.

If you don't find .bak or .res files then set backup next time, before solver launch. All current iterations results are lost.

And I recommend running CFX in standalone mode, not from Workbench. It is much more easier to manage different files in Standalone mode.
karachun is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
foam-extend-4.1 release hjasak OpenFOAM Announcements from Other Sources 19 July 16, 2021 06:02
How to read data from a table in the solver code openfoam upuli OpenFOAM Programming & Development 0 July 7, 2020 05:42
Validation Data for Riemann vacuum solver Flexflix Main CFD Forum 2 August 3, 2018 11:33
accessing solver data with UDF macros Dushan FLUENT 1 April 22, 2017 22:05
studying a valve case mina.basta OpenFOAM 33 August 30, 2013 05:46


All times are GMT -4. The time now is 04:12.