Need Your Help
Hi every one i am nnew member here in CFD and new using CFD and i have a lot of Q if you can help me to start over this big world CFD CFX
1- i need to know what i need to know 1st befor using any software ?? 2- what is the best and easy software can i use?? 3- i use MSC.Patran in FEM and need to know if Patran inegrated CFD plug or not?? i am really need your support coz i am going to start CFD Calculation over Wing aft FEM thank alot for this big forum and waiting you reply Ahmed Shawky Aeronautical Engineer |
hi Ahmed
First af all it is very important to read one of the famous refrences in CFD to make your self familiar with the basic of CFD,,,may be the refrence of Anderson is easy and suitable,,,,, Secondly you must do your own codes so as to catch what you want to do,,,, I hope that i help you,,, With my best regards. |
Thanks yaser for your reply
but can you tll me where i can download refrences in CFD refrence of Anderson? and what you mean with Code and my code? and what program you use in CFD? |
Many thanks to you Ahmed
I have many books about CFD,there no problem pls write your E.mail to send you these books. Your own code i mean that you must try hard to solve the problems in the refrence by yourself(code them and compare ur results with others),,this is may be a right way to understand CFD.. thanks |
This is my Email ahmed.shawki83@gmail.com
|
new to cfd
hallo ahmed and yasir
i m a final yr btech student of indian institute of tech. . I am given the btec project as simulation of in cylinder processes using star cd. i have no idea about the software but people say it is very difficult to work with star cd i donot understand what code means or wat is the level of difficulty. i have 6 months to complete my work. if any of you can share ur experience of working on the software and the level of difficulty. also do u think the time limit is sufficient for the job??? plz do reply.... u can also mail any suggestions at vyas.manuj@gmail.com |
Quote:
thank you |
All times are GMT -4. The time now is 11:21. |