Gambit boundary layer

pixie · September 30, 2009, 05:48

Hi
I hope sum1 can help me.
I've checked for a solution on previous posts but everything i've tried (that has been suggested on this forum) DOES NOT work. As time is a major factor, I thought I'd post sumthing and ask for help...

I am trying to create a boundary layer mesh for a multi-element airfoil but the direction of the arrow (and boundary layer) is into the airfoil. I've subtracted the airfoil+flap faces from the domain and then the arrow direction is along the airfoil. there are sum posts of creating a 'box' but didn't find them to be clear on what is required. of course shift-middle button does not work either.
Please help

PS I know the boundary can be adapted in Fluent, but was hoping to do this in Gambit cos have a couple of simulations to run, with different flap and slat configurations.

Thanx
Jullie

Nectanebo80 · September 30, 2009, 12:22

Hello,

I think that you should construct your surfaces not by substracting one from another. I advise you to construct the surfaces by creating them from edges. You will need at least 3 edges to construct a face. If you don't have enough edges, you can construct some edges passing through some points (you will have to choose these points). And after, if you don't want too many surfaces, you can merge them. I always do this way in order to avoid the problem with the normal on the surface boundary.
I hope that this will help..

September 30, 2009, 05:48	Gambit boundary layer	#1
pixie New Member Jules Join Date: Jul 2009 Location: Sydney, Australia Posts: 9 Rep Power: 16	Hi I hope sum1 can help me. I've checked for a solution on previous posts but everything i've tried (that has been suggested on this forum) DOES NOT work. As time is a major factor, I thought I'd post sumthing and ask for help... I am trying to create a boundary layer mesh for a multi-element airfoil but the direction of the arrow (and boundary layer) is into the airfoil. I've subtracted the airfoil+flap faces from the domain and then the arrow direction is along the airfoil. there are sum posts of creating a 'box' but didn't find them to be clear on what is required. of course shift-middle button does not work either. Please help PS I know the boundary can be adapted in Fluent, but was hoping to do this in Gambit cos have a couple of simulations to run, with different flap and slat configurations. Thanx Jullie

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gambit boundary layer distortion	ghost	FLUENT	4	September 14, 2009 01:26
CREATION OF BOUNDARY LAYER	Jibran Haider	FLUENT	3	August 1, 2008 00:33
GAMBIT problem with 3D Boundary Layer when meshing	Anthony Haroutunian	FLUENT	2	March 26, 2008 02:02
How to use boundary layer option in gambit	san	FLUENT	0	May 5, 2006 00:41
GAMBIT BOUNDARY LAYER	Rich	FLUENT	0	August 27, 2003 14:13

September 30, 2009, 12:22		#2
Nectanebo80 New Member Ervin Join Date: Mar 2009 Posts: 4 Rep Power: 17	Hello, I think that you should construct your surfaces not by substracting one from another. I advise you to construct the surfaces by creating them from edges. You will need at least 3 edges to construct a face. If you don't have enough edges, you can construct some edges passing through some points (you will have to choose these points). And after, if you don't want too many surfaces, you can merge them. I always do this way in order to avoid the problem with the normal on the surface boundary. I hope that this will help..