CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

DNS of blasius flow for trasition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   October 15, 2009, 20:05
Default DNS of blasius flow for trasition
  #1
taw
New Member
 
Join Date: Oct 2009
Posts: 29
Rep Power: 16
taw is on a distinguished road
I try to do DNS of blasius flow for trasition. I presume I put the correct unstable modes and boundary condition, including the code, and disturbance equations. But I can only see TS waves damping downstream. I follow the work of Fasel. But my question is, since the streamwise velocity magitude along constant y actually decreases in the downstream direction (i.e. as the boundary layer grows), why do the waves grow in the first place.

I am intrigued, and must have missed something. Can someone in this field explain to me about it using simple logic. For instance how do I treat pressure values, i.e. I just use the pressure to enforce divergence free flow. and obviously for bl dp/dx=0. So do I need to enforce p_upstream_edge=p_dowstream_edge?. But already in the base flow u/u_infinity=1 ouside the boundary layer.


TAW
taw is offline   Reply With Quote

Old   October 19, 2009, 04:22
Default
  #2
Member
 
Edison
Join Date: Mar 2009
Posts: 40
Rep Power: 17
hadesmajesty is on a distinguished road
(1) "why do the waves grow in the first place."
I want to ask the same question!
hadesmajesty is offline   Reply With Quote

Old   October 19, 2009, 10:47
Default
  #3
SKK
Member
 
Join Date: Mar 2009
Posts: 55
Rep Power: 17
SKK is on a distinguished road
I am not quite sure why the disturbance grow. But depending on the stability charecteristic of the flow these disturbances can amplify or die down along the flow. When the amplitude of TS waves are small compared to the base flow, you can use linearised stability equation to find the growth characeteristic, since the growth depends on linear characeteristic.
SKK is offline   Reply With Quote

Old   October 19, 2009, 22:23
Default
  #4
New Member
 
Shyam
Join Date: Apr 2009
Posts: 29
Rep Power: 16
shyamdsundar is on a distinguished road
It might be related to the boundary layer instability used in estimating the laminar to turbulence transition zone. This can be mathematically analyzed by linearizing the NS equations for the boundary layer, and then doing a fourier analysis to estimate its stability characteristics. This, I think, will provide the stability characteristics of the boundary layer flow. Please correct me if I am wrong.
shyamdsundar is offline   Reply With Quote

Old   October 19, 2009, 22:49
Default
  #5
taw
New Member
 
Join Date: Oct 2009
Posts: 29
Rep Power: 16
taw is on a distinguished road
Thank you for the above responses,

I do take both replies correct. It is true the LST actually provides the stability of the flow to infintismal amplitude disturbances, and I was able to obtain this result as in the published papers on stability planes. That solution is an eigenvalue solution method, and the result is in wavenumber-Re space.

My problem, is when I wanted to reproduce this result with FV-DNS. Many publications have successfully reproduced this. For instance, in DNS the outflow bc is the source of the problem, as it creates unphysical wave reflections, and I did some absorbing condition for that. But still, I only see a damping wave, for the most unstable frequencies, and I said that is reasonable if the stream wise velocity is decellarating downstream. But it is not the case, and I was wondering what I have missed. Right now I am investigating if the absorbing bc has contribution on the unexpected damping.

Regards,

TAW
taw is offline   Reply With Quote

Old   October 20, 2009, 04:42
Default
  #6
SKK
Member
 
Join Date: Mar 2009
Posts: 55
Rep Power: 17
SKK is on a distinguished road
Correct me if I am wrong, but it is in accelerating flow that you may see dampening of turbulence generation. Positive acceleration in effect increased transition region. In decelerating flow transition is more easily induced. I am speaking in terms of the physics of transition process.
SKK is offline   Reply With Quote

Old   October 20, 2009, 05:24
Default
  #7
taw
New Member
 
Join Date: Oct 2009
Posts: 29
Rep Power: 16
taw is on a distinguished road
Hi SKK,

Thanks for the reply.

I think what you said is correct; that for instance favorable pressure gradient dp/dx<o (flow accelerated), delays flow reversal for a flat plate flow, and in essence turbulence, for subsonic range.

In the flat plate flow, flow transition, as you said deceleration (or static pressure increase) would be responsible for the onset of turbulence.


Thank you very much for reminding me the basics. I will further look through my simulation, in light of this.

Cheers

TAW
taw is offline   Reply With Quote

Reply

Tags
blsius flow, dns, transition

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
benchmark: flow over a circular cylinder goodegg Main CFD Forum 12 January 22, 2013 12:47
Can 'shock waves' occur in viscous fluid flows? diaw Main CFD Forum 104 February 16, 2006 06:44
Problem on boundry of two phase flow youngan CFX 0 June 30, 2003 03:32
Mass Flow Inlet Pravir Kumar Rai FLUENT 0 February 19, 2003 15:03
DNS of homogeneous shear flow: comments please! ff_fan Main CFD Forum 1 September 12, 2002 03:28


All times are GMT -4. The time now is 19:57.