[Takeoff]

Hello everyone ,I'm new here.

I want to design intake manifold 1 inlet and 4 outlets 3D transient model
I've some problems following :

1.I want to set boundary @ outlet by pressure profile like this

Crank angle / Pressure
x1 / y1
x2 / y2
. .
. .

How can I set these data each outlet


***Opening and closing valve @ 600 rpm, 2000 rpm and 3600 rpm

2.Need I do intake valve (Moving mesh ??)
If yes ,How?

3.Has anybody validation case about intake manifold?

Thanks , Hassan