get instationary response

hugdev · November 17, 2009, 04:14

Hi!
work on a flow around an airbrake, which in reality has transient solutions. The problem is that cfx always send me the same steady response, even when I lauch the transient mode.
How could I do to get a transient solution, how could I insert the instationarity? are there typical initial conditions, typical boundary conditions to get that kind of transient response?
Thanks for your help
hugh

CP85 · November 17, 2009, 04:28

Hi,

some things that come into my mind:

Is the mesh fine enough?
Did you try different turbulence-models?
Is the timestep fine enough when performing an instationary solution?
Are the flow velocity and the fluid parameters compareable to reality?

November 17, 2009, 04:14	get instationary response	#1
hugdev New Member Join Date: Nov 2009 Posts: 1 Rep Power: 0	Hi! work on a flow around an airbrake, which in reality has transient solutions. The problem is that cfx always send me the same steady response, even when I lauch the transient mode. How could I do to get a transient solution, how could I insert the instationarity? are there typical initial conditions, typical boundary conditions to get that kind of transient response? Thanks for your help hugh

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Response time of Fluent support	Rami	FLUENT	8	March 5, 2008 02:00
'No response from HOST' error-Moving mesh problems	Alfred Herman	Siemens	1	June 15, 2007 06:53
How to plot time response curve in fluent	sam	FLUENT	0	September 7, 2006 16:15
Awaiting your response	m. malik	Main CFD Forum	0	April 12, 2005 12:43
Using neural networks for CDF response surfaces	Ali Habibi	Main CFD Forum	3	October 8, 1999 22:56

November 17, 2009, 04:28		#2
CP85 New Member Join Date: Sep 2009 Posts: 10 Rep Power: 16	Hi, some things that come into my mind: Is the mesh fine enough? Did you try different turbulence-models? Is the timestep fine enough when performing an instationary solution? Are the flow velocity and the fluid parameters compareable to reality?