CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Grvity fow from Orifice

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 2, 2010, 10:49
Default Grvity fow from Orifice
  #1
New Member
 
Dr. Ahmad Helmi
Join Date: Apr 2010
Posts: 1
Rep Power: 0
ahmed.helmi is on a distinguished road
Dear All
I am simulatring a 3-d simple problem
a 20cm. diameter pipe with length also 20 cm flowing from a constant head circular reservoir 1.0 m. diameter and has a height of 1.0 m. above the center line of pipe. i used pressure inlet at the top of the reservoir (the pressure was set to zero gauge), the outlet was defined as a pressure outlet also with 0 gauge pressure,
(No flow vomes out ?)
if any body can help
Regards
Ahmad Helmi
ahmed.helmi is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Flow past orifice aurel Main CFD Forum 0 January 27, 2009 07:46
plan orifice model hadi FLUENT 0 September 23, 2008 03:42
Cavitation of an Orifice Plate in Pipe System CFXuser CFX 0 April 8, 2006 10:30
Orifice Flow John Eichler Main CFD Forum 1 November 6, 2002 13:26
Orifice Flow Prateep Chatterjee FLUENT 4 February 23, 2001 15:59


All times are GMT -4. The time now is 05:19.