CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

gambit meshing for the flow passing cylinder

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 9, 2010, 14:41
Question gambit meshing for the flow passing cylinder
  #1
Member
 
L.Y LIN
Join Date: Mar 2010
Posts: 49
Rep Power: 16
iilw1314 is on a distinguished road
hi everyone .you may help me if you are someone who knows gambit .
anyone can help me to mesh the zone for flow passing cylinder using the unstructured grid.

i choose the form 'pave ',but unfortunately,i cannot get a good mesh as choosing 'map'(structured grids).i really want to get concentric circle mesh for boundary layer of the cylinder.i should say the reason why that i did not use the operation of mesh boundary in gambit is that i find that using the transition patern "1:1" can cause strange mesh and i do not want use "4:2"or others for the boundary of the cylinder.anyone can tell me how to get good mesh for the flow passing cylinder useing ustructured grids?thx.
iilw1314 is offline   Reply With Quote

Old   April 9, 2010, 20:53
Default
  #2
Senior Member
 
ztdep's Avatar
 
p ding
Join Date: Mar 2009
Posts: 427
Rep Power: 19
ztdep is on a distinguished road
Send a message via Yahoo to ztdep Send a message via Skype™ to ztdep
Dear friends:
Multiblock stuructued grid system is strongly suggested for the problem. seperate the zone into several blocks, generate structured grid in each region.
Attached Images
File Type: jpg untitled.jpg (26.1 KB, 52 views)
ztdep is offline   Reply With Quote

Old   April 10, 2010, 02:43
Red face
  #3
Member
 
L.Y LIN
Join Date: Mar 2010
Posts: 49
Rep Power: 16
iilw1314 is on a distinguished road
Quote:
Originally Posted by ztdep View Post
Dear friends:
Multiblock stuructued grid system is strongly suggested for the problem. seperate the zone into several blocks, generate structured grid in each region.
yes,you are right ,but i have another problem.my case is 2D and i use another code to deal with the result *.neu from gambit.and that code require only one face exist.if i use multiblock ,there may be sevral faces .i know that fluent can do well with the 'sevral faces' but my code is not fluent.so i really need one face at last and i have tried many ways to get one face at the last but all failed,any suggestion?thx!
iilw1314 is offline   Reply With Quote

Old   April 10, 2010, 08:30
Default
  #4
Senior Member
 
ztdep's Avatar
 
p ding
Join Date: Mar 2009
Posts: 427
Rep Power: 19
ztdep is on a distinguished road
Send a message via Yahoo to ztdep Send a message via Skype™ to ztdep
Dear friends:
I often use the neutral file from the gambit. the face between every blocks will dispear when you output the mesh file. It is just a assistance to improve the mesh quanlity
ztdep is offline   Reply With Quote

Old   April 11, 2010, 12:10
Red face
  #5
Member
 
L.Y LIN
Join Date: Mar 2010
Posts: 49
Rep Power: 16
iilw1314 is on a distinguished road
Quote:
Originally Posted by ztdep View Post
Dear friends:
I often use the neutral file from the gambit. the face between every blocks will dispear when you output the mesh file. It is just a assistance to improve the mesh quanlity
thanks,now i think it's not that problems.my code can deal with the 'o' grids(concentric circle)badly.so the method of using multibolcks seems meaningless ,so i have to use the boundary setings in gambit to do it with one block and use the transition pattern '4:2"not "1:1".only in this way my code can get through.so strange!so boring!..e..
iilw1314 is offline   Reply With Quote

Old   April 11, 2010, 20:28
Default
  #6
tez
New Member
 
Tez
Join Date: Oct 2009
Posts: 12
Rep Power: 16
tez is on a distinguished road
Why don't you try structured grid in the boundary layer and then triangles outside the boundary layer. It should work fine, provided your solver allows that.
tez is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
flow over a cylinder urgent! kevin FLUENT 8 August 11, 2015 14:00
benchmark: flow over a circular cylinder goodegg Main CFD Forum 12 January 22, 2013 12:47
[GAMBIT] 3D boundary layer and meshing problem in GAMBIT 2.4.6 prashanthreddyh ANSYS Meshing & Geometry 1 December 20, 2011 01:35
flow around a cylinder pXYZ Main CFD Forum 14 July 25, 2011 11:05
Moving a Cylinder in cross flow after solving Dynamics equations of motion maruthamuthu_venkatraman OpenFOAM 1 November 19, 2009 14:55


All times are GMT -4. The time now is 01:41.