CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

LES on two phase flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 12, 2004, 09:10
Default LES on two phase flow
  #1
Li Yang
Guest
 
Posts: n/a
Hello everyone,

When I use "LES and two phase" to search, I could not find many papers. However, when I use "LES and combustion" to search, I can find hundreds papers. I can see LES on combustion work get published every month.

I am wondering if the turbulent effect is not so important in two phase flow or LES on two phase flow is too complicate ? It doesn't seem very active in this area at the moment.

For attached flow or flow with small separation, RANS simulation is probably accurate enough for engineering application. Only when there are large separations or large re-circulations or flows like jets, LES becomes important as RANS can not simulate them very well. Do you think this is the reason that not many LES work on two phase flow have been done ?

Thanks for your reply in advance.

Li
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
mass flow in is not equal to mass flow out saii CFX 12 March 19, 2018 06:21
setup problems - LES pipe flow with cyclic BC (1) and direct mapped inlet (2) florian_krause OpenFOAM 22 June 13, 2013 22:25
Two phase flow with condensation Sunnie FLUENT 0 May 31, 2009 11:02
Validation for laminar Disperse phase flow shashwat Main CFD Forum 0 April 4, 2008 03:20
Inviscid Drag at subsonic, subcritical Mach # Axel Rohde Main CFD Forum 1 November 19, 2001 13:19


All times are GMT -4. The time now is 18:18.