Stirred vessel Multiphase simulation(Sand+Water) -- CFD Online Discussion Forums

June 14, 2010, 06:09	Stirred vessel Multiphase simulation(Sand+Water)	#1
lalitupadhayay New Member lalit upadhayay Join Date: Jun 2010 Posts: 2 Rep Power: 0	Hi all, I am new to CFD .. I want to know the volume fraction of sand in water in a stir tank with 4 baffles and one PBT propeller inserted from bottom. I am using Eulerian,K-Epsilon,MRF model for it.. for that i need to create a volume around the impeller as rotating reference .and baffles and rest part as stationary reference frame... I am confused at the following points... 1. do i need to create to separate volumes for sand and water for initial postition... 2. If this is the case then how would i create MRF cylinder n my main tank model? Please some one guide me on this issue... I will be very thankful Regards, Lalit

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RTD--> Mixing vessel Multiphase	Ant	FLUENT	0	July 27, 2006 06:36
stirred vessel simulation	selvam R.P	CFX	0	December 23, 2005 08:16
Mesh problems for a stirred vessel with baffles!	UY	CFX	0	September 14, 2005 10:19
Tracer problem in stirred vessel	UW	CFX	0	July 25, 2005 22:23
CFD-simulation of a stirred vessel	Peter	FLUENT	5	February 1, 2000 05:51

All times are GMT -4. The time now is 07:11.