unstructure cartesian mesh viewer

hadian · August 7, 2010, 07:58

Hi
i am working on unstructured Cartesian grid on moving domain. i created a code for grid generation and i am looking for a package that can handle this type of grid (commercial or free). what is your recommendation? what about tecplot, paraview..?
an example of the mesh is (from a reference): http://img135.imageshack.us/img135/5602/46840800.jpg

valgrinda · August 7, 2010, 14:06

Hei Hadian,

both should work. For Tecplot your should use the FE-Brick cell type and for Paraview the unstructured grid with the VTK_VOXEL cell type.

You can get the Tecplot file format reference here:
ftp://ftp.tecplot.com/pub/doc/tecplo...dataformat.pdf

and the Paraview reference here:
http://www.vtk.org/VTK/img/file-formats.pdf

If you plan on parallelizing your code with the domain decomposition method (i.e. MPI), Paraview offers great support for parallel data output. From Experience, Paraview seems to be faster and more stable than Tecplot - and it is for free.

Cheers
Hans

August 7, 2010, 07:58	unstructure cartesian mesh viewer	#1
hadian Member Mohammad Reza Hadian Join Date: Mar 2009 Location: Yazd, Iran Posts: 52 Rep Power: 17	Hi i am working on unstructured Cartesian grid on moving domain. i created a code for grid generation and i am looking for a package that can handle this type of grid (commercial or free). what is your recommendation? what about tecplot, paraview..? an example of the mesh is (from a reference): http://img135.imageshack.us/img135/5602/46840800.jpg Last edited by wyldckat; September 3, 2015 at 17:59. Reason: disabled embedded images

August 7, 2010, 14:06	Paraview and Tecplot	#2
valgrinda Super Moderator Hans Bihs Join Date: Jun 2009 Location: Trondheim, Norway Posts: 377 Rep Power: 17	Hei Hadian, both should work. For Tecplot your should use the FE-Brick cell type and for Paraview the unstructured grid with the VTK_VOXEL cell type. You can get the Tecplot file format reference here: ftp://ftp.tecplot.com/pub/doc/tecplo...dataformat.pdf and the Paraview reference here: http://www.vtk.org/VTK/img/file-formats.pdf If you plan on parallelizing your code with the domain decomposition method (i.e. MPI), Paraview offers great support for parallel data output. From Experience, Paraview seems to be faster and more stable than Tecplot - and it is for free. Cheers Hans

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Other] vtk mesh or Abaqus mesh to OpenFOAM	bigphil	OpenFOAM Meshing & Mesh Conversion	27	November 23, 2015 17:31
mesh missing after export in gambit	morteza08	Main CFD Forum	0	July 23, 2010 02:19
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
basic of mesh refinement	arya	CFX	4	June 19, 2007 12:21
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10