 |
 |
 |
|
|
|
[Sponsors] | ||||
November 8, 2010, 04:04
|
Pressure drop- multiphase
|
#1 |
|
New Member
Nelly
Join Date: Oct 2010
Posts: 5
Rep Power: 15  |
Hi,
I am trying to simulate multiphase flow for a Heat Exchanger. The heat exchanger tubes modeled as porous media because of the complexity of the geometry. Initially for a single phase run, at an assumed pressure drop of 2 bars from the inlet to outlet, I calculated a resistance value of 1e6 using darcys law. Cfd pictures show a pressure drop of almost 2 bars which is great! Later i put an extra gas phase to it with the same resistance value, now CFD calculates a pressure drop of 4 bars. This is not desired. How do I fix the pressure drop to 2 bars for two phase flow. Please suggest. Thanks Nelly |
|
|
|
|
 |
| Tags |
| multiphase pressure drop |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How to plot pressure drop with Periodic BC? | bigfans | FLUENT | 7 | November 8, 2016 11:28 |
| Total and static pressure drop | Janakiram | Siemens | 1 | February 8, 2009 01:32 |
| Pressure Drop at entrance of a rotor-stator. | Resnick | Main CFD Forum | 0 | November 20, 2007 14:50 |
| Periodic boundaries and pressure drop | MatejK | CFX | 2 | July 12, 2005 04:47 |
| what the result is negatif pressure at inlet | chong chee nan | FLUENT | 0 | December 29, 2001 05:13 |
Linear Mode
