CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Main CFD Forum

k-epsilon model with LBM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 23, 2004, 21:04
Default k-epsilon model with LBM
  #1
Sangit
Guest
 
Posts: n/a
Hi For my thesis I am implementing k-epsilon model for backward step. So for that reason I am using the the standard Launder and Spalding model with wall function. And I am assigning the boundary values at the first nodes from the wall for k and epsilon. Also I am initializing the initial value of k and epsilon at inlet.The equation of the boundary values are at 1st nodes from wall : k=utau^^2*sqrt(c_mu) and epsilon=utau^^3/(kappa*delta) . How can i calculate the utau and y+ at the first node. I know that the initial values are valid if y is between 20 to 100 .And what will be the value of delta as it is the distance from the wall to the 1st node ... in my velocity mesh it is y=1 .... So i am confused .... how can I proceed .... any step by step calculation for utau , y+ and delta will be very much helpful ......
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wrong calculation of nut in the kOmegaSST turbulence model FelixL OpenFOAM Bugs 27 March 27, 2012 09:02
Compressible epsilon blows up swahono OpenFOAM 10 November 26, 2010 06:38
Problems bout CFD model of biomass gasification, Downdraft gasifier wanglong FLUENT 2 November 26, 2009 00:27
k-epsilon model with LBM Sangit Main CFD Forum 0 November 23, 2004 21:01
K-Epsilon Model sangit Main CFD Forum 2 September 9, 2004 13:19


All times are GMT -4. The time now is 00:59.