|
[Sponsors] |
mesh a Y-section (circular pipe) with all Hex elements? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 8, 2011, 11:11 |
mesh a Y-section (circular pipe) with all Hex elements?
|
#1 |
Senior Member
Pei-Ying Hsieh
Join Date: Mar 2009
Posts: 334
Rep Power: 18 |
Dear CFD experts,
I am wondering if someone can point to me examples of decomposing a Y-section pipe (circular cross section) into multi-blocks so that I can mesh it with all hex elements. For the Y, I am looking looking for both same diameter coming to the Y and different diameters coming into the Y. Thanks! Pei-Ying |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
3D Hybrid Mesh Errors | DarrenC | ANSYS Meshing & Geometry | 11 | August 5, 2013 06:42 |
[ANSYS Meshing] Hex meshing producing poor quality elements on multibody part | aarvay | ANSYS Meshing & Geometry | 8 | March 16, 2012 15:29 |
[blockMesh] generate a graded pipe mesh. | jenright | OpenFOAM Meshing & Mesh Conversion | 0 | August 22, 2009 08:58 |
Terrible Mistake In Fluid Dynamics History | Abhi | Main CFD Forum | 12 | July 8, 2002 09:11 |
CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 12, 2001 23:19 |