CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

Laminar vs Turbulent Navier-Stokes

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 7, 2011, 12:34
Default Laminar vs Turbulent Navier-Stokes
  #1
New Member
 
Truman Ellis
Join Date: Mar 2011
Location: Austin, TX
Posts: 5
Rep Power: 15
truman is on a distinguished road
I am trying to wrap my head around the practical considerations of solving laminar vs turbulent Navier-Stokes. I understand that the plain Navier Stokes equations describe the most general case and that if they were solved at sufficient spatial and time resolution (as in DNS) they would describe the appropriate laminar or turbulent flow for whatever application that you were considering. I also understand that Reynolds (or Favre) averaging seeks to average out the turbulent fluctuating terms so that such high resolution is not necessary.

Referring to http://www.cfd-online.com/Wiki/Favre_averaged_Navier-Stokes_equations, the Favre averaged equations (30) - (32) look just like the original Navier-Stokes equations (1) - (3) with some additional turbulent terms that need to be modeled via a turbulent closure model like k-omega or k-epsilon. So, assuming laminar flow and neglecting the turbulence terms, it looks like we are back to the original Navier-Stokes except each instantaneous variable has been replaced with its averaged equivalent. This leads me to my point of confusion, if you attempt to solve the full Navier-Stokes equations without sufficient spatial and time resolution, are you just assuming laminar conditions and solving for the laminar solution? Will this solution approach the full turbulent solution as you refine in space and time? A related question: if you neglect all time derivatives in equations (1) - (3), what are you actually solving for some pseudo Reynolds or Favre averaged solution or will you arrive at a steady-state laminar solution? None of these conclusions feel right to me, but I can't quite put my finger on what is wrong.

Any help is appreciated.
Thank you.
truman is offline   Reply With Quote

Old   March 7, 2011, 12:58
Default
  #2
Senior Member
 
truffaldino's Avatar
 
Join Date: Jan 2011
Posts: 249
Blog Entries: 5
Rep Power: 17
truffaldino is on a distinguished road
Reynolds averaged equations look like navier stokes if you forget that viscousity is now an unknown variable. Eddy viscousity changes from point to point and extra equations are needed to compute it.
truffaldino is offline   Reply With Quote

Old   March 7, 2011, 13:27
Default
  #3
New Member
 
Truman Ellis
Join Date: Mar 2011
Location: Austin, TX
Posts: 5
Rep Power: 15
truman is on a distinguished road
But if you make the assumption that your flow is laminar, the eddy viscosity goes to zero and you are only left with the molecular viscosity and the original Navier-Stokes equations. I guess part of my question comes down to: what is the difference between assuming laminar flow and solving the full Navier-Stokes equations, aside from resolution?
truman is offline   Reply With Quote

Old   March 7, 2011, 13:42
Default
  #4
Senior Member
 
truffaldino's Avatar
 
Join Date: Jan 2011
Posts: 249
Blog Entries: 5
Rep Power: 17
truffaldino is on a distinguished road
Sorry I have not read your question carefully.
Here is the answer:
Turbulence exists on large scales too, this is not the problem of resolution, rather it is problem of stability of solution of NS equation which can be broken at large scales too, depending on Reynolds number.

If you take NS equation on more coarse grid, solution will also become unstable after reynolds number will exceed critical value.

In other words at certain reynolds numbers laminar solution is not stable and chaotic solution you will get does not approach turbulent solution, as this is a chaotic systems where limit does not exists (unless you are going to DNS scale).

Last edited by truffaldino; March 7, 2011 at 15:55.
truffaldino is offline   Reply With Quote

Old   March 7, 2011, 13:51
Default
  #5
New Member
 
Truman Ellis
Join Date: Mar 2011
Location: Austin, TX
Posts: 5
Rep Power: 15
truman is on a distinguished road
Ok, but then how do you solve a laminar flow problem at high Reynolds number, say a high-speed laminar boundary layer?
truman is offline   Reply With Quote

Old   March 7, 2011, 14:22
Default
  #6
Senior Member
 
truffaldino's Avatar
 
Join Date: Jan 2011
Posts: 249
Blog Entries: 5
Rep Power: 17
truffaldino is on a distinguished road
Quote:
Originally Posted by truman View Post
Ok, but then how do you solve a laminar flow problem at high Reynolds number, say a high-speed laminar boundary layer?
High-speed laminar boundary layer does not exist at whole lenght (as Re exceeds certain limit there is a transition to turbulence along the stream). This is an essence of turbulence, that non-chaotic solution is not stable! This is why it is so difficult to account for it.

To get insight why it happens take a look at Orr-Sommerfeld theory.

Last edited by truffaldino; March 7, 2011 at 15:54.
truffaldino is offline   Reply With Quote

Old   March 7, 2011, 14:44
Default
  #7
New Member
 
Truman Ellis
Join Date: Mar 2011
Location: Austin, TX
Posts: 5
Rep Power: 15
truman is on a distinguished road
All of my undergrad aerodynamics just came back to me. Thank you, it all makes a lot more sense now.
truman is offline   Reply With Quote

Old   July 8, 2017, 13:45
Default
  #8
Member
 
Min Zhang
Join Date: Mar 2017
Posts: 81
Rep Power: 9
minzhang is on a distinguished road
Quote:
Originally Posted by truman View Post
I am trying to wrap my head around the practical considerations of solving laminar vs turbulent Navier-Stokes. I understand that the plain Navier Stokes equations describe the most general case and that if they were solved at sufficient spatial and time resolution (as in DNS) they would describe the appropriate laminar or turbulent flow for whatever application that you were considering. I also understand that Reynolds (or Favre) averaging seeks to average out the turbulent fluctuating terms so that such high resolution is not necessary.

Referring to http://www.cfd-online.com/Wiki/Favre_averaged_Navier-Stokes_equations, the Favre averaged equations (30) - (32) look just like the original Navier-Stokes equations (1) - (3) with some additional turbulent terms that need to be modeled via a turbulent closure model like k-omega or k-epsilon. So, assuming laminar flow and neglecting the turbulence terms, it looks like we are back to the original Navier-Stokes except each instantaneous variable has been replaced with its averaged equivalent. This leads me to my point of confusion, if you attempt to solve the full Navier-Stokes equations without sufficient spatial and time resolution, are you just assuming laminar conditions and solving for the laminar solution? Will this solution approach the full turbulent solution as you refine in space and time? A related question: if you neglect all time derivatives in equations (1) - (3), what are you actually solving for some pseudo Reynolds or Favre averaged solution or will you arrive at a steady-state laminar solution? None of these conclusions feel right to me, but I can't quite put my finger on what is wrong.

Any help is appreciated.
Thank you.
I really like this topic and I learned something from this discussion. Thanks!
I am just a beginner for OpenFOAM and I want to talk about my thinking. But I am not sure whether it is correct.
1. If you choose to use the Reynolds averaged equations, you can not neglect the turbulence terms, that is to say, you cannot assume laminar flow. This is because if you neglected the turbulence terms, that equations will be invalid. I mean the averaged values won't satisfy the Navier-Stokes equations.
minzhang is offline   Reply With Quote

Old   July 10, 2017, 08:20
Default
  #9
Senior Member
 
Filippo Maria Denaro
Join Date: Jul 2010
Posts: 6,760
Rep Power: 71
FMDenaro has a spectacular aura aboutFMDenaro has a spectacular aura aboutFMDenaro has a spectacular aura about
Quote:
Originally Posted by minzhang View Post
I really like this topic and I learned something from this discussion. Thanks!
I am just a beginner for OpenFOAM and I want to talk about my thinking. But I am not sure whether it is correct.
1. If you choose to use the Reynolds averaged equations, you can not neglect the turbulence terms, that is to say, you cannot assume laminar flow. This is because if you neglected the turbulence terms, that equations will be invalid. I mean the averaged values won't satisfy the Navier-Stokes equations.

Actually, if you would solve the RANS equations without modelling the unresolved stress you would have formally no difference with a laminar steady solver. The steady state would have a deterministic meaning, not a statistical one. The key is that at low Reynolds number that will drive to a physically relevant steady solution whilst, by increasing the Re number, you will get no longer convergence towards a steady state.
FMDenaro is offline   Reply With Quote

Reply

Tags
cfd, laminar, navier-stokes, turbulence

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX Treatment of Laminar and Turbulent Flows Jade M CFX 18 September 15, 2022 08:08
Laminar doesn't converge; Turbulent models do? Amit FLUENT 11 April 23, 2015 23:55
LBM Vs navier stokes equations in turbulent fluid flow modeling. sharad_shevate Main CFD Forum 0 August 3, 2009 02:25
Half laminar and turbulent model trying to solve Andrew Clarke FLUENT 5 May 19, 2008 14:40
Newbie:Viscoelasticity and Navier stokes equation Rajil Saraswat Main CFD Forum 2 June 9, 2003 08:21


All times are GMT -4. The time now is 06:42.