 |
 |
 |
|
|
|
[Sponsors] | ||||
March 15, 2011, 05:35
|
Obstructed internal flow - convergence stall
|
#1 |
|
New Member
anonymous
Join Date: Mar 2011
Posts: 1
Rep Power: 0  |
Hi everyone,
I'm modelling an unsteady 2D channel flow with a semi-circular obstruction located midway through the channel. The inlet velocity is uniform but is gradually increased (from zero) with time. I noticed that after a certain inlet velocity, the solver residual is not monotically reducing as before - instead the convergence is somewhat stalled !? Why is that ? And, how could this be overcome ? Appreciate all the response. |
|
|
|
|
 |
| Tags |
| cfx, convergence stall, obstructed flow |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
| Internal Flow BCs for Compressible inlet flow | Katie | FLUENT | 2 | March 3, 2012 17:35 |
| early stall, poor convergence, and mesh quality | everest | CFX | 2 | May 12, 2010 16:27 |
| Convergence Problems Internal Flow | Haroon Junaidi | FLUENT | 2 | January 30, 2008 07:40 |
| internal flow and external flow ? | Pathway0320 | FLUENT | 1 | November 17, 2006 03:37 |
Linear Mode
