CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

FLUId-SoliD InteRACtion !!! any suggetion

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 6, 2005, 15:51
Default FLUId-SoliD InteRACtion !!! any suggetion
  #1
SAM
Guest
 
Posts: n/a
I am undergraduate student .My final year project is due in 2 months. I need help

This project is related to some processing industry

My problem statement is:

In room there are pipes on groud for heating purpose. Hot gases are flowing inside these pipes and then convected to air in the room and then it should conducted through walls and then convected to ambient air.

I want to see the where the maximum heat lost is occuring.

I need to know how to model this in Fluent and or any CFD software

wat should be domain

Wat shuld be the boundary condtion at pipes , and walls

Thanks in advance

  Reply With Quote

Old   February 7, 2005, 21:08
Default Re: FLUId-SoliD InteRACtion !!! any suggetion
  #2
Derrek
Guest
 
Posts: n/a
I would suggest you look at the Fluent documentation rather than posting the same question numerous times.

But I will provide a little head start....

If you intend to model everything, then you will have a conjugate heat transfer model with the hot gas and the wall thickness of the pipes. You then need to model the room as a natural convection (buoyant) domain (unless there is a fan driving the air in the room). Most likely it is sufficient to model the conduction through the room walls and apply a convection to the outside as a boundary condition. So you will have 2 FLUID domains (the gas in the pipe and the air in the room) and 2 SOLID domains (the pipe wall thickness and the room walls).

Good luck!

Derrek

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can CFX do CHT simulations with a solid domain rotating in a stationary fluid domain? acro CFX 15 September 23, 2016 12:16
Fluid Structure Interaction fw407 OpenFOAM Running, Solving & CFD 9 February 14, 2013 18:25
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Chemical interaction between solid and fluid rock FLUENT 3 March 31, 2010 18:49
coupling solid and fluid cells?? kcg Siemens 4 March 13, 2007 10:39


All times are GMT -4. The time now is 12:30.