CFD Online Logo CFD Online URL
Home > Forums > Main CFD Forum

Simple Meshed Edges Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   February 8, 2005, 14:29
Default Simple Meshed Edges Problem
Posts: n/a
Hi There,

I have a problem with meshing connected, aligned edges: I have four edges in line with each other. I want Gambit to treat the four edges as one edge when it goes to mesh them.

This needs to be done so that the nodes are distributed appropriately along the entire length of the four edges when a ratio is applied.

Any advice would be great

Thanks Rich
  Reply With Quote

Old   February 9, 2005, 02:38
Default Re: Simple Meshed Edges Problem
Posts: n/a
Try to merge the four edges. It may create virtual line which can be meshed and does not break previous faces. Or when you first delete the face it creates you can make the merged line real. Could be...
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Problem with parallel edges in ICEM Twix ANSYS Meshing & Geometry 3 November 21, 2015 09:30
Simple mathematical problem? Frank Wedburn Main CFD Forum 8 March 23, 2012 18:26
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
DPM - simple problem (I think) Maciej FLUENT 0 November 9, 2005 17:28
? Simple CFD problem Davy Main CFD Forum 0 August 21, 1998 06:19

All times are GMT -4. The time now is 22:53.