No tip vortices or wake vortices StarCCM+ Water simulation

Giorgio Eid · May 3, 2023, 07:10

No tip vortices or wake vortices StarCCM+ Water simulation
Hello,

I am studying a model of a propulsor with an underwater foil on StarCCM+. To prepare my full simulation with free surface and VoF, I ran a more simple one completely underwater, using Segregated Flow, RANS, K-w SST, All y+, Virtual disk, a well-refined mesh, implicit unsteady and vorticity-based AMR at 35 knots (18 m/s) which ran for 1.5 s (physical time).

My residuals are all < 10^-3, the solution around the geometry looks reasonable but there are no tip-end vortices or vortices behind the Virtual disk. It looks like the vortices start and just die out suddenly. My wake is basically non-existent and I only see straight streamlines in the wake.

Has anyone ever encountered such a problem, or has any idea as to how to solve it?

I would greatly appreciate any help, Thank you!

JBeilke · May 8, 2023, 07:11

Do you really expect a tip vortex, when you replace the real geometry of the propeller with a "VirtualDisk"?

May 3, 2023, 07:10	No tip vortices or wake vortices StarCCM+ Water simulation	#1
Giorgio Eid New Member Join Date: Jun 2022 Posts: 2 Rep Power: 0	No tip vortices or wake vortices StarCCM+ Water simulation Hello, I am studying a model of a propulsor with an underwater foil on StarCCM+. To prepare my full simulation with free surface and VoF, I ran a more simple one completely underwater, using Segregated Flow, RANS, K-w SST, All y+, Virtual disk, a well-refined mesh, implicit unsteady and vorticity-based AMR at 35 knots (18 m/s) which ran for 1.5 s (physical time). My residuals are all < 10^-3, the solution around the geometry looks reasonable but there are no tip-end vortices or vortices behind the Virtual disk. It looks like the vortices start and just die out suddenly. My wake is basically non-existent and I only see straight streamlines in the wake. Has anyone ever encountered such a problem, or has any idea as to how to solve it? I would greatly appreciate any help, Thank you!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
water splash simulation for real wheel of bike	iamsaugat07	Main CFD Forum	2	July 26, 2022 22:29
zero or very small amount of water saturation in my fuel cell simulation	kobe bryant	FLUENT	0	July 2, 2016 22:11
Vertical axis water turbine simulation	SHIKHA BHUYAN	ANSYS	0	September 16, 2014 01:06
Vertical axis water turbine simulation	SHIKHA BHUYAN	CFX	1	September 15, 2014 07:40
Make a simulation of water flowing into a vase !??	Vu Trinh Tuan	CFX	7	April 6, 2005 14:23

May 8, 2023, 07:11		#2
JBeilke Senior Member Joern Beilke Join Date: Mar 2009 Location: Dresden Posts: 498 Rep Power: 20	Do you really expect a tip vortex, when you replace the real geometry of the propeller with a "VirtualDisk"?