|
[Sponsors] |
Prerequisites for successfully simulating(DNS) a turbulent boundary layer? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 25, 2016, 12:31 |
Prerequisites for successfully simulating(DNS) a turbulent boundary layer?
|
#1 |
New Member
Pawan Kerkar
Join Date: Sep 2016
Posts: 29
Rep Power: 9 |
Suggest a path with me successfully simulating a turbulent boundary layer as an end goal.
Consider I have done only my undergrad. What books, journal papers should I read so that I will have a strong foundation. Do not include coding and numerical aspects. I already have a functional solver. The reason for me asking this question is that I don't feel confident with my knowledge. I developed a code, and now I have to simulate a turbulent boundary layer. I didn't take the steps in between, so when i read papers, there are lot of confusions. I don't quite understand the meaning and significance of most of the terms used in papers. I think, I have started directly with high level/recent papers without knowing the things the authors of these papers assume the reader to know. Thanks a lot for your time and suggestions. |
|
December 25, 2016, 13:23 |
|
#2 |
Senior Member
Filippo Maria Denaro
Join Date: Jul 2010
Posts: 6,768
Rep Power: 71 |
To tell the truth, I doubt that you can be able in performing this type of simulation without a strong background in turbulence and CFD...furthermore, you will need a huge computational resourse...
For example, see this old paper http://www.sciencedirect.com/science...21999183712106 |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Atmospheric Boundary Layer high turbulent flow | Bollonga | FLUENT | 3 | March 12, 2019 11:17 |
My radial inflow turbine | Abo Anas | CFX | 27 | May 11, 2018 01:44 |
Basic Nozzle-Expander Design | karmavatar | CFX | 20 | March 20, 2016 08:44 |
Question about heat transfer coefficient setting for CFX | Anna Tian | CFX | 1 | June 16, 2013 06:28 |
Questions about Boundary Layer Thickness and Turbulence Models | famerfamer | STAR-CCM+ | 3 | July 12, 2012 09:47 |