Mesh Generation

April 12, 2005, 10:49

Could anyone please let me know which code/software is the best for STRUCTURED/MultiBlock Grid Generation? It has to be able to do both structured (no FE please) and MultiBlock grids.

Gambit, GridGen, ...?? I am not sure about CAD softwares, like Pro/Engineering, is it able to generate volume mesh as well as design works?

Any advice would be helpful.

Lynn

April 12, 2005, 13:52

GAMBIT is good, u can also use ICEM

April 13, 2005, 11:13

The first question that you should ask yourself is: How much money do I have available for a grid generation software?

There are of course many nice codes, but they will cost you as much as a reasonable car.

Usually one is more interested in the best code, that one can afford.

regards

Tom

April 14, 2005, 09:35

I completely agree with Tom.

And believe me: Gambit is not always so good...and its CAD features are crummy.

Edi.

April 18, 2005, 18:41

From own experience Gridgen... but the cost might be an issue.

-- Jarmo

April 12, 2005, 10:49	Mesh Generation	#1
Lynn Guest Posts: n/a	Could anyone please let me know which code/software is the best for STRUCTURED/MultiBlock Grid Generation? It has to be able to do both structured (no FE please) and MultiBlock grids. Gambit, GridGen, ...?? I am not sure about CAD softwares, like Pro/Engineering, is it able to generate volume mesh as well as design works? Any advice would be helpful. Lynn

April 12, 2005, 13:52	Re: Mesh Generation	#2
sharuk Guest Posts: n/a	GAMBIT is good, u can also use ICEM

April 13, 2005, 11:13	Re: Mesh Generation	#3
Tom Guest Posts: n/a	The first question that you should ask yourself is: How much money do I have available for a grid generation software? There are of course many nice codes, but they will cost you as much as a reasonable car. Usually one is more interested in the best code, that one can afford. regards Tom

April 14, 2005, 09:35	Re: Mesh Generation	#4
edi Guest Posts: n/a	I completely agree with Tom. And believe me: Gambit is not always so good...and its CAD features are crummy. Edi.

April 18, 2005, 18:41	Re: Mesh Generation	#5
Jarmo Monttinen Guest Posts: n/a	From own experience Gridgen... but the cost might be an issue. -- Jarmo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 04:24
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM	kawamatt2	ANSYS Meshing & Geometry	17	December 20, 2011 11:45
mesh generation for in-cylinder fluent simulation	hennas	ANSYS Meshing & Geometry	2	May 31, 2011 15:08
General questions on grid-based computing	Adrin Gharakhani	Main CFD Forum	21	June 5, 2000 13:47