|
[Sponsors] |
November 11, 2011, 01:41 |
star design - to model heat transfer
|
#1 |
New Member
Join Date: Mar 2011
Posts: 11
Rep Power: 15 |
hi
im new to CFD and as i experience convergence problems in my mesh (designed using solid works and prosurf and proamm and exported to pro star), i redesigned my mesh in star design and it get converged in star design and later i export it to pro star by enabling "start pro star gui". then i tried to change the properties of the material (temperature, viscosity and density as function of time etc..) and run the .mdl file again, but once post processed, i noticed the material properties havent been changed and it remains in initial valued i entered in star design. is it possible for us to change the parameters in pro star .mdl file which is originally generated in star design?. can i model conduction and radiation heat transfer after getting the .mdl file and changing the parameters in pro star user guide pannel? (i ddnt follow the standard procdure, star design -> .dbs in pro surf -> pro amm -> pro star ) |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Two-sided Wall Heat Transfer BC - No Separate Solid Mesh and No Heat Transfer Coeff | swahono | OpenFOAM Running, Solving & CFD | 10 | October 15, 2018 05:43 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
unsteady heat transfer model problem | Beryl | FLUENT | 0 | July 12, 2011 23:26 |
model forced convection heat transfer on a heat sink | farzad | FLUENT | 0 | September 9, 2010 14:48 |
Info: Short Course On Thermal Design of Electronic Equipment | Arnold Free | Main CFD Forum | 0 | August 10, 1999 10:18 |