|
[Sponsors] |
December 24, 2011, 12:05 |
Kiva 4 burning problem
|
#1 |
New Member
Join Date: Nov 2010
Posts: 9
Rep Power: 15 |
hi everyone,
I'm working on kiva 4 for engine simulation and I'm very new in kiva. I am running the program but i couldnt obtain burning. Fuel enters the cylinder but not burning. Why is the fuel not burning in ignition time? Also why is the original itape 5 code not working. Please help me... And if it is possible could somebody send me a working itape 5 code to an example? Thanks.... polatseyfi@hotmail.com |
|
January 3, 2012, 11:58 |
examples for kiva 3V or kiva 4.
|
#2 |
New Member
ninguna
Join Date: Oct 2011
Posts: 6
Rep Power: 14 |
Hi, I'm working with kiva 3V.
I need examples for kiva 3V or kiva 4. non engine application. someone who can help me? someone who has worked with kiva 3v or kiva4? I'm trying to simulate a spray impacting on a surface. |
|
January 5, 2012, 00:40 |
Same here Kiva 4
|
#3 |
New Member
Carlos
Join Date: Jul 2011
Posts: 1
Rep Power: 0 |
I'm trying to make combustion using Diesel. As far as we have using equilibrium internals (kwikeq=1) the temperature variations are to high. Using equilibrium equations (nre=4) the sistems does some combustion. But the coefficients of this system of equatios don't include any time term or reaction rate. Kinetics equations (nke=6) are for gasoline and only work with spark plug (these equations barely work)
Any sugestions? Equilibrium only will do the trick? or kinetics are needed? if kinetics are needed wich reduced mechanism can we use? |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with interFoam; Wave/wiggle alpha1 behavior | JonW | OpenFOAM | 10 | February 4, 2023 08:27 |
[Other] engineFoam new mesh problem | ayhan515 | OpenFOAM Meshing & Mesh Conversion | 5 | August 10, 2015 09:45 |
UDF compiling problem | Wouter | Fluent UDF and Scheme Programming | 6 | June 6, 2012 05:43 |
Gambit - meshing over airfoil wrapping (?) problem | JFDC | FLUENT | 1 | July 11, 2011 06:59 |
Adiabatic and Rotating wall (Convection problem) | ParodDav | CFX | 5 | April 29, 2007 20:13 |