isotropic homogeneous turbulent flow field

Matthias89 · January 12, 2012, 22:54

Hello!

For a project I need a downloadable CFD code that simulates a isotropic homogeneous turbulent flow field. Also I would be happy with just data form DNS or other simulations, because I need the velocity field to model a combustion. Does anyone of you know where I could get something like that?

Thanks!

cfdnewbie · January 16, 2012, 10:06

http://www.amazon.co.uk/Fluid-Flow-P...6726231&sr=8-1

The accompanying CD has a spectral code on it, however the book is really expensive and I found it to be not too good.

The generation of valid HIT data can be a real pain in the neck, so seems like a big project you are working on!

cheers and good luck, I'll be happy to help any further!

sail · January 16, 2012, 10:13

Openfoam has some tutorial with it.

BUT, given that DNS requires tons of cpu time to get some results, maybe could be more cost-effective to search the literature for the results.

Matthias89 · January 17, 2012, 01:57

Thanks a lot!
@cfdnewbie: Is this a 3D HIT on the CD in that book?

cfdnewbie · January 17, 2012, 08:53

yes, from a given E(k) spectrum using Rogallo's procedure (if that means anything to you....)
need more help?

cheers!

Matthias89 · January 17, 2012, 19:50

Yes I came across rogallos code during my literature research. Could I get a suitable velocity field out of it and in what form is the velocity field supplied? You're a great help, thank you!

cfdnewbie · January 18, 2012, 06:41

Well, you will get an incompressible (i.e. div free) u,v,w field from that, but I guess you would have to compute the pressure from that via a poisson equation.... I'm not sure if an incompressible field is what you are looking for, I know there are some methods to get a compressible field from an incompressible one (one by G. Blaisdell).

The code is available as source code (F77, I think), so you can just modify it in any way for your output requirements.

Matthias89 · January 25, 2012, 22:06

Quote:

Originally Posted by cfdnewbie

Well, you will get an incompressible (i.e. div free) u,v,w field from that, but I guess you would have to compute the pressure from that via a poisson equation.... I'm not sure if an incompressible field is what you are looking for, I know there are some methods to get a compressible field from an incompressible one (one by G. Blaisdell).

The code is available as source code (F77, I think), so you can just modify it in any way for your output requirements.

Okay, I decided to try to work with that code. But before I buy the book, can you tell me:

Can I generate a 100^3, 200^3 and maybe 400^3 grid velocity field with multiple time steps? And how long would the code run for a time step?

January 16, 2012, 10:13		#3
sail Senior Member Vieri Abolaffio Join Date: Jul 2010 Location: Always on the move. Posts: 308 Rep Power: 16	Openfoam has some tutorial with it. BUT, given that DNS requires tons of cpu time to get some results, maybe could be more cost-effective to search the literature for the results. __________________ http://www.leadingedge.it/ Naval architecture and CFD consultancy

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
difference between isotropic and homogeneous in turbulence	dut_thinker	Main CFD Forum	11	January 23, 2021 11:11
Laminar flow or Turbulent flow	mech	FLUENT	0	January 27, 2007 18:51
laminar and turbulent flow in one simulation	msna	FLUENT	0	January 27, 2007 17:35
Reynolds and Turbulent flow	Frederic Dubinski	CFX	5	October 21, 2004 04:12

January 12, 2012, 22:54	isotropic homogeneous turbulent flow field	#1
Matthias89 New Member Matthais Join Date: Jan 2012 Posts: 5 Rep Power: 14	Hello! For a project I need a downloadable CFD code that simulates a isotropic homogeneous turbulent flow field. Also I would be happy with just data form DNS or other simulations, because I need the velocity field to model a combustion. Does anyone of you know where I could get something like that? Thanks!

January 16, 2012, 10:06		#2
cfdnewbie Senior Member cfdnewbie Join Date: Mar 2010 Posts: 557 Rep Power: 20	http://www.amazon.co.uk/Fluid-Flow-P...6726231&sr=8-1 The accompanying CD has a spectral code on it, however the book is really expensive and I found it to be not too good. The generation of valid HIT data can be a real pain in the neck, so seems like a big project you are working on! cheers and good luck, I'll be happy to help any further!

January 17, 2012, 01:57		#4
Matthias89 New Member Matthais Join Date: Jan 2012 Posts: 5 Rep Power: 14	Thanks a lot! @cfdnewbie: Is this a 3D HIT on the CD in that book?

January 17, 2012, 08:53		#5
cfdnewbie Senior Member cfdnewbie Join Date: Mar 2010 Posts: 557 Rep Power: 20	yes, from a given E(k) spectrum using Rogallo's procedure (if that means anything to you....) need more help? cheers!

January 17, 2012, 19:50		#6
Matthias89 New Member Matthais Join Date: Jan 2012 Posts: 5 Rep Power: 14	Yes I came across rogallos code during my literature research. Could I get a suitable velocity field out of it and in what form is the velocity field supplied? You're a great help, thank you!

January 18, 2012, 06:41		#7
cfdnewbie Senior Member cfdnewbie Join Date: Mar 2010 Posts: 557 Rep Power: 20	Well, you will get an incompressible (i.e. div free) u,v,w field from that, but I guess you would have to compute the pressure from that via a poisson equation.... I'm not sure if an incompressible field is what you are looking for, I know there are some methods to get a compressible field from an incompressible one (one by G. Blaisdell). The code is available as source code (F77, I think), so you can just modify it in any way for your output requirements.