|January 27, 2012, 02:12||
Branch Cut management(Elliptic Grid Generation of Hoffmann CFD reference)
Join Date: Apr 2010
Posts: 71Rep Power: 8
I have a trouble during managing branch cut of doubly connected domain.
Now I'm refering page 391 of CFD VOL I written by Hoffmann.
After excution of the program, I found that I had a bended tip at the trailing edge. According to the equation 9-77, y(1,j) is calculated then y(IM,j) = y(1,j). But it yeiled a bended trailing tip as pics attached(there are zipped). So I had to make y(1,j) as zero by force to get reasonable y coordinates(I mean zero points)
Should the original algebraic grid has zero point at trailing edge?! I mean x,y at trailing edge is chord/2,0
Last edited by dokeun; January 27, 2012 at 02:31.
|doubly connected domain, ellipic grid, hoffman|
|Thread||Thread Starter||Forum||Replies||Last Post|
|CFD Salary||CFD||Main CFD Forum||17||January 3, 2017 18:09|
|OpenFOAM 1.6-ext git installation on Ubuntu 11.10 x64||Attesz||OpenFOAM Installation||45||January 13, 2012 13:38|
|mass flow in is not equal to mass flow out||saii||CFX||2||September 18, 2009 08:07|
|public CFD Code development||Heinz Wilkening||Main CFD Forum||38||March 5, 1999 12:44|
|Latest news in mesh generation||Robert Schneiders||Main CFD Forum||0||March 2, 1999 05:07|