SIMPLE and SIMPLER code

August 14, 2005, 20:13

I just started a project on CFD and was keen to write some cfd code to get the real feel. Can anyone out there tip me where I can find the source code for SIMPLE / SIMPLER scheme (preferably on fortran) so that I can get & proceed from it.

/your prompt response appreciated. Thx.

August 15, 2005, 04:16

try Ferziger . Peric, Computational Methods for Fluid Dynamics book, and see the index and it tells you how you could get acess to the source codes server site. best wish

August 15, 2005, 11:27

Hi

Have you got the codes. If not then I can send you.

Vinod Dhiman

August 15, 2005, 17:50

August 15, 2005, 18:01

Dear Vinod, Thankyou for your prompt response. I am still in dire need to find the codes, SIMPLE/R . Your offer to send me is appreciated, and please send me through my email, tawnhb@yahoo.com. I also thank the Ferziger book codes info, I have found the server and I am currently looking through the codes (thx Goraw). cheers, Taw

August 16, 2005, 04:39

Hi

I was also talking about the Peric codes. I have, however, not read the codes by Peric. So, if you don't find SIMPLE and SIMPLER in those codes then I'll send you subroutine, which uses SIMPLER.

Vinod Dhiman

August 16, 2005, 05:36

Dear Vinod, thanKyou for the response. Actually I am novice to the CFD. Patankar's book was fascinating to me and that was how I get to get hold of the need to the code SIMPLER, the book which I well understood right now. Going through the Peric code is what I am struggling at the present, but I really need purely Simpler codes at this point of time. In the Peric code it doesnt actually use SIMPLER, I think; but I found it mentioning it as similar to SIMPLER. So I woluld really appreciate it very much if you can send me of yours. Again thakyou in advance. TAW

August 18, 2005, 07:25

Dear Vinod, Last time u said u would send me the SIMPLE/SIMPLER paper it didn't come. You have should have sent me and repected your word. I am in a serious research and I thougt u understood it so. sorry

August 18, 2005, 11:58

Take it easy my friend, check the resources link on this web site it is full of codes, enjoy and hope that will help.

August 24, 2005, 04:25

Hi

I was out for some time. Anyway, the code I have is in F90, and the results are very good. Send me your ID, and I'll send you the code.

Vinod Dhiman

August 25, 2005, 06:09

Hi Vinod,

You may use this one tawnhb@yahoo.com

taw

August 14, 2005, 20:13	SIMPLE and SIMPLER code	#1
TAW Guest Posts: n/a	I just started a project on CFD and was keen to write some cfd code to get the real feel. Can anyone out there tip me where I can find the source code for SIMPLE / SIMPLER scheme (preferably on fortran) so that I can get & proceed from it. /your prompt response appreciated. Thx.

August 15, 2005, 04:16	Re: SIMPLE and SIMPLER code	#2
goraw Guest Posts: n/a	try Ferziger . Peric, Computational Methods for Fluid Dynamics book, and see the index and it tells you how you could get acess to the source codes server site. best wish

August 15, 2005, 11:27	Re: SIMPLE and SIMPLER code	#3
Vinod Dhiman Guest Posts: n/a	Hi Have you got the codes. If not then I can send you. Vinod Dhiman

August 15, 2005, 17:50	Re: SIMPLE and SIMPLER code	#4
Larr Guest Posts: n/a

August 15, 2005, 18:01	Re: SIMPLE and SIMPLER code	#5
TAW Guest Posts: n/a	Dear Vinod, Thankyou for your prompt response. I am still in dire need to find the codes, SIMPLE/R . Your offer to send me is appreciated, and please send me through my email, tawnhb@yahoo.com. I also thank the Ferziger book codes info, I have found the server and I am currently looking through the codes (thx Goraw). cheers, Taw

August 16, 2005, 04:39	Re: SIMPLE and SIMPLER code	#6
Vinod Dhiman Guest Posts: n/a	Hi I was also talking about the Peric codes. I have, however, not read the codes by Peric. So, if you don't find SIMPLE and SIMPLER in those codes then I'll send you subroutine, which uses SIMPLER. Vinod Dhiman

August 16, 2005, 05:36	Re: SIMPLE and SIMPLER code	#7
TAW Guest Posts: n/a	Dear Vinod, thanKyou for the response. Actually I am novice to the CFD. Patankar's book was fascinating to me and that was how I get to get hold of the need to the code SIMPLER, the book which I well understood right now. Going through the Peric code is what I am struggling at the present, but I really need purely Simpler codes at this point of time. In the Peric code it doesnt actually use SIMPLER, I think; but I found it mentioning it as similar to SIMPLER. So I woluld really appreciate it very much if you can send me of yours. Again thakyou in advance. TAW

August 18, 2005, 07:25	Re: SIMPLE and SIMPLER code	#8
TAw Guest Posts: n/a	Dear Vinod, Last time u said u would send me the SIMPLE/SIMPLER paper it didn't come. You have should have sent me and repected your word. I am in a serious research and I thougt u understood it so. sorry

August 18, 2005, 11:58	Re: SIMPLE and SIMPLER code	#9
Ahmed Guest Posts: n/a	Take it easy my friend, check the resources link on this web site it is full of codes, enjoy and hope that will help.

August 24, 2005, 04:25	Re: SIMPLE and SIMPLER code	#10
Vinod Dhiman Guest Posts: n/a	Hi I was out for some time. Anyway, the code I have is in F90, and the results are very good. Send me your ID, and I'll send you the code. Vinod Dhiman

August 25, 2005, 06:09	Re: SIMPLE and SIMPLER code	#11
taw Guest Posts: n/a	Hi Vinod, You may use this one tawnhb@yahoo.com taw

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SIMPLE (or SIMPLER) fortran code	Francesco Di Maio	Main CFD Forum	6	January 18, 2017 04:59
SIMPLE, SIMPLER or PISO?	Gem Leku	Main CFD Forum	7	October 24, 2007 11:20
SIMPLE OR SIMPLER algorithm	Sergio Costa	Main CFD Forum	2	July 29, 2007 06:44
SIMPLE, SIMPLER Examples	Maciej Matyka	Main CFD Forum	9	November 3, 2003 05:11
An example code for SIMPLE	George Pek	Main CFD Forum	6	July 6, 2003 16:54