Fluidizied Bed with Particle Using CFD

baboonthefool · February 20, 2013, 09:05

Hello all my friends in this group discussion
Let me introduce my self, my name Andre Sufadia G.S from majority Mechanical Engineering in Institute Technology Bandung. Now, I am still doing my final report for my graduation but I need some favors about simulation fluidizied bed with particles.

Have you ever make simulation about fluidized bed with a particle before?
Can you please tell me the steps or tutorial link how to add the "particle" factor into the simulation by using gambit and fluent?
Thanks you

elina · March 28, 2013, 04:50

Hi
I am also dealing the same problem...

give me your email
elinamathew@ymail.com is my email..send me details..

mettler · March 28, 2013, 07:30

Fluent - flow through porous media

elina · March 28, 2013, 08:45

Can you explain regarding the flow through porous media...?? Because I have to make the porosity by arranging the spheres in such a way that I get 40% porosity and also just hot water flowing from the top....Help me pls...

mettler · March 28, 2013, 09:08

do a literature search for journal articles written regarding the flow through porous media. There has been a lot of research done on the subject. I'll email you some journal papers dealing with the subject.

elina · March 28, 2013, 12:56

Thank you thanks a lot...but are you talking about the porous material as a substance or as I said is there any related to my problem..?? becoz in my case meshing is the problem....

mettler · March 28, 2013, 13:13

are you using Fluent? Fluent has a good porous media tutorial. You will just set up a 'porous zone' and define it according to your specific condition..permeability etc.

elina · March 28, 2013, 19:31

Hi I am suing Ansys Workbench in that FLUENT and the thing is I cant just consider it as a zone becoz I have to study the heat transfer between the solid Spheres and fluid which is flowing through the surface...See the attachment..this is how it is supposed to be...and in the geometry also I will have to give some contact surface so that the meshing will be proper...But I have no clue how to do...

mettler · March 28, 2013, 19:37

Are you assuming the solid spheres to have a certain flux? or a constant temperature? What is your BC for the spheres? If you just have to the two spheres to mesh, along with the fluid zone, that won't be too difficult. I'd mesh each of the spheres first and then mesh the fluid zone.

elina · March 28, 2013, 19:48

the assignment is that of a heat storage system..That is layers of Granite may be the sphere material will be arrianged one above the other in a tank where the inside of the tank is insulated..and from the top that is inlet water @ 360 K and 0.001 to 0.1 m/s velocity flows....so naturaly there will be some heat transfer between the fluid and spheres..I have to see that and the outlet temperature ..its much better when we get very less outlet temperature say like 200 or watever...but that shows its efficiency that lot of heat is stored in the spheres...And based on the number of elements in the sphere and the fluid region there outlet temperature changes....and at some point it will be constant..so have to check that also....and to show the graph...of that temperature and elements dependencies..that is just apart of my assignment..at the end have to calculate the out let temperature and Biot numbers ,nusselts number etc...and its dependencies...based on the outlet temperatures...Sir can you give me your email ID

masooma · August 10, 2013, 11:38

hello friends,i am masooma from chemical engineering department and i am doing my ms project on 2 dimensional fluidized bed but i am facing a problem regarding geometry setting in gambit
can any body help me out......thnx

dahonglong · August 13, 2013, 10:17

It is very simple to simulate fluidized bed system using Fluent.
You could use the following model
Eulerian granular multiphase model with heat transfer ( fluidized bed simulation)

February 20, 2013, 09:05	Fluidizied Bed with Particle Using CFD	#1
baboonthefool New Member Bichos Baboon Join Date: Feb 2013 Posts: 1 Rep Power: 0	Hello all my friends in this group discussion Let me introduce my self, my name Andre Sufadia G.S from majority Mechanical Engineering in Institute Technology Bandung. Now, I am still doing my final report for my graduation but I need some favors about simulation fluidizied bed with particles. Have you ever make simulation about fluidized bed with a particle before? Can you please tell me the steps or tutorial link how to add the "particle" factor into the simulation by using gambit and fluent? Thanks you

August 10, 2013, 11:38	setting geometry for fluidized bed	#11
masooma New Member masooma qizilbash Join Date: Aug 2013 Posts: 1 Rep Power: 0	hello friends,i am masooma from chemical engineering department and i am doing my ms project on 2 dimensional fluidized bed but i am facing a problem regarding geometry setting in gambit can any body help me out......thnx

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CFD for Rotating Bed	MP	Main CFD Forum	3	January 4, 2003 11:30
Where do we go from here? CFD in 2001	John C. Chien	Main CFD Forum	36	January 24, 2001 21:10
ASME CFD Symposium, Atlanta, July 2001	Chris R. Kleijn	Main CFD Forum	0	August 21, 2000 04:49
Which is better to develop in-house CFD code or to buy a available CFD package.	Tareq Al-shaalan	Main CFD Forum	10	June 12, 1999 23:27
public CFD Code development	Heinz Wilkening	Main CFD Forum	38	March 5, 1999 11:44

March 28, 2013, 04:50		#2
elina Member Elina Mathew Join Date: Mar 2013 Posts: 47 Rep Power: 13	Hi I am also dealing the same problem... give me your email elinamathew@ymail.com is my email..send me details..

March 28, 2013, 07:30		#3
mettler Senior Member Andrew Join Date: Mar 2009 Location: Washington, DC Posts: 209 Rep Power: 18	Fluent - flow through porous media

March 28, 2013, 08:45		#4
elina Member Elina Mathew Join Date: Mar 2013 Posts: 47 Rep Power: 13	Can you explain regarding the flow through porous media...?? Because I have to make the porosity by arranging the spheres in such a way that I get 40% porosity and also just hot water flowing from the top....Help me pls...

March 28, 2013, 09:08		#5
mettler Senior Member Andrew Join Date: Mar 2009 Location: Washington, DC Posts: 209 Rep Power: 18	do a literature search for journal articles written regarding the flow through porous media. There has been a lot of research done on the subject. I'll email you some journal papers dealing with the subject.

March 28, 2013, 12:56		#6
elina Member Elina Mathew Join Date: Mar 2013 Posts: 47 Rep Power: 13	Thank you thanks a lot...but are you talking about the porous material as a substance or as I said is there any related to my problem..?? becoz in my case meshing is the problem....

March 28, 2013, 13:13		#7
mettler Senior Member Andrew Join Date: Mar 2009 Location: Washington, DC Posts: 209 Rep Power: 18	are you using Fluent? Fluent has a good porous media tutorial. You will just set up a 'porous zone' and define it according to your specific condition..permeability etc.

March 28, 2013, 19:37		#9
mettler Senior Member Andrew Join Date: Mar 2009 Location: Washington, DC Posts: 209 Rep Power: 18	Are you assuming the solid spheres to have a certain flux? or a constant temperature? What is your BC for the spheres? If you just have to the two spheres to mesh, along with the fluid zone, that won't be too difficult. I'd mesh each of the spheres first and then mesh the fluid zone.

March 28, 2013, 19:48		#10
elina Member Elina Mathew Join Date: Mar 2013 Posts: 47 Rep Power: 13	the assignment is that of a heat storage system..That is layers of Granite may be the sphere material will be arrianged one above the other in a tank where the inside of the tank is insulated..and from the top that is inlet water @ 360 K and 0.001 to 0.1 m/s velocity flows....so naturaly there will be some heat transfer between the fluid and spheres..I have to see that and the outlet temperature ..its much better when we get very less outlet temperature say like 200 or watever...but that shows its efficiency that lot of heat is stored in the spheres...And based on the number of elements in the sphere and the fluid region there outlet temperature changes....and at some point it will be constant..so have to check that also....and to show the graph...of that temperature and elements dependencies..that is just apart of my assignment..at the end have to calculate the out let temperature and Biot numbers ,nusselts number etc...and its dependencies...based on the outlet temperatures...Sir can you give me your email ID

August 13, 2013, 10:17		#12
dahonglong New Member Leo Join Date: Aug 2013 Posts: 1 Rep Power: 0	It is very simple to simulate fluidized bed system using Fluent. You could use the following model Eulerian granular multiphase model with heat transfer ( fluidized bed simulation)