CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > General Forums > Main CFD Forum

boundary and initial condition for SST k-omga turbulence model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 18, 2012, 00:47
Default boundary and initial condition for SST k-omga turbulence model
  #1
Senior Member
 
Mehdi Baba Mehdi
Join Date: Jan 2011
Posts: 158
Rep Power: 15
mb.pejvak is on a distinguished road
Hi everyone.

I am writing self-developing code and I want to apply SSt k-omega turbulence model for simulation of flow over a flat plate. but I can't find any good references that has and explains boundary and initial conditions for external flow. I find some that have different boundary, esp. for inlet and far-filed. for example, in some references propose that viscosity ratio (Mut/Mu) should be between 1 and 10 and also turbulence intensity and using these two, value of k and omega in inlet can be calculated as follow:

Inlet:
(kinlet=1.5*(turbulence intensity*free stream velocity)^2 ,
Mut=(1-10)*Mu
omegainlet=ru*kinlet/mu*viscosity ratio)

far field boundary:
Omegainf>10*free stream velocity/L L: characteristic Length
Mutinf<10e-2*Mutmax
Kinf=Mutinf*omegainf/ru

but I should mention in some paper constant numbers are different. in some paper or user's guide suggest that turbulence intensity set between 1-10%.

My problem is these boundary layer is correct and how can specify viscosity ratio and turbulence intensity in specified Re?
And if any good reference explain it, I really appreciate letting me know.

Thanks in advance.
mb.pejvak is offline   Reply With Quote

Old   April 18, 2012, 21:26
Default
  #2
Senior Member
 
Join Date: Nov 2009
Posts: 411
Rep Power: 19
DoHander is on a distinguished road
Turbulence modelling for CFD by Wilcox:

http://www.amazon.com/gp/product/192...SIN=1928729088
DoHander is offline   Reply With Quote

Old   April 19, 2012, 02:28
Default
  #3
Senior Member
 
Mehdi Baba Mehdi
Join Date: Jan 2011
Posts: 158
Rep Power: 15
mb.pejvak is on a distinguished road
Thank you so much DoHander.
I read the book that you introduce, but I can find any boundary condition for inlet and freestream in external flow.
Are you sure these boundary conditions were introduced in the book? and if yes, could you please tell me which part of this (I know in part 7.2.2 was talked about turbulent/non-turbulent interfaces, But boundary conditions were not introduced).

Thank you.

Last edited by mb.pejvak; April 19, 2012 at 02:46.
mb.pejvak is offline   Reply With Quote

Old   May 1, 2012, 21:06
Default
  #4
Senior Member
 
Mehdi Baba Mehdi
Join Date: Jan 2011
Posts: 158
Rep Power: 15
mb.pejvak is on a distinguished road
I found a good paper "Effective Inflow Conditions for Turbulence Models in
Aerodynamic Calculations" by Spalart and Rumsey that explained inflow boundary condition for SST k-omega and SA turbulence models and also they recommended inflow boundary condition for these two models.
mb.pejvak is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
transsonic nozzle with rhoSimpleFoam Unseen OpenFOAM Running, Solving & CFD 8 July 1, 2022 07:54
Wind turbine simulation Saturn CFX 58 July 3, 2020 02:13
problem with Min/max rho tH3f0rC3 OpenFOAM 8 July 31, 2019 10:48
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05


All times are GMT -4. The time now is 02:45.