CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Mesh Generation & Pre-Processing (https://www.cfd-online.com/Forums/mesh-generation/)
-   -   Mesh Aspect ratio and Angle (https://www.cfd-online.com/Forums/mesh-generation/121654-mesh-aspect-ratio-angle.html)

star August 2, 2013 07:01
Mesh Aspect ratio and Angle
 
1 Attachment(s)
Hi. I generate quadrilateral grid around 2D airfoil using C grid in ICEM. I am a beginner of CFD. I found that Mesh Aspect ratio is very high in some region. Also some angles are less than 45 degree. I want to ask that this type of mesh is ok and will it work correctly with different viscous models in fluent? I am uploading here my mesh so that my question becomes clear.

jdrch August 3, 2013 12:33
According to what an Applications Engineer told me during an ANSYS onsite visit, Fluent can handle aspect ratios as high as 0.99 now with no issue.

Far August 22, 2013 10:03
You are confusing aspect ratio with skewness.

Fluent can handle aspect ratio up to 10000 on doubl precision solver in boundary layer

jdrch September 7, 2013 02:24
Quote:
Originally Posted by Far (Post 447461)
You are confusing aspect ratio with skewness.

Fluent can handle aspect ratio up to 10000 on doubl precision solver in boundary layer
My mistake, sorry!


All times are GMT -4. The time now is 17:34.