Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Exporting Surface Mesh from Hypermersh to STAR CCM+

Mark Forums Read

Reply

Search this Thread

June 9, 2015, 08:51	Exporting Surface Mesh from Hypermersh to STAR CCM+	#1
muz_cfd New Member Syed Muzammil Hussain Join Date: Jun 2013 Posts: 4 Rep Power: 12	Hello Buddies, Can anyone tell me how to export Surface Mesh from Hypermesh & to import the same in STAR CCM+ ??...I will be very grateful to you.

Reply

Tags

hypermesh, star ccm+, surface mesh

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Surface mesh not sticking to surface	holtwong	ANSYS Meshing & Geometry	2	April 20, 2023 08:28
[snappyHexMesh] Problem with Sanpper, surface still Rough	Zephiro88	OpenFOAM Meshing & Mesh Conversion	7	November 5, 2014 12:05
Inner geometry gets lost exporting mesh from ICEM CFD to CFX-Pre	powpow	CFX	3	December 20, 2012 09:14
[snappyHexMesh] Layers don't fully surround surface	EVBUCF	OpenFOAM Meshing & Mesh Conversion	14	August 20, 2012 04:31
mesh algo for volume mesh in star ccm	rohit	Siemens	1	August 8, 2008 20:44

All times are GMT -4. The time now is 00:47.