Home > Forums > Special Topics > Mesh Generation & Pre-Processing

Convert .stp to .geo

Mark Forums Read

Reply

Search this Thread

April 15, 2017, 03:57	Convert .stp to .geo	#1
hjxy2012 New Member Green Join Date: Apr 2016 Posts: 27 Rep Power: 10	Hello, everyone. I have a .stp from NX and I want to convert it to .geo. Is there any methods to do it? I know if you open a .stp file with Gmsh and a .geo file will be created. But this is not what I want because I can't modify the geometry in this way. Thank you.

Reply

Tags

.geo, .stp, gmsh files, siemens nx

« Previous Thread | Next Thread »

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tool to convert OpenFoam mesh to SU2 mesh (2D and 3D)	Combas	SU2	51	April 17, 2025 12:58
[snappyHexMesh] Convert stl files and multi region	abrunet	OpenFOAM Meshing & Mesh Conversion	1	July 1, 2014 10:15
convert a structured multiblock grid to an one unstructured: modification of cells	Mirage	ANSYS	0	July 18, 2012 09:14
[Gmsh] Unable to Convert .stp to .msh file FOAM FATAL IO ERROR	SrStompy	OpenFOAM Meshing & Mesh Conversion	0	March 1, 2012 14:55

All times are GMT -4. The time now is 08:04.