|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
Jose Francisco Wilson
Join Date: Apr 2017
Posts: 1
Rep Power: 0 ![]() |
Hello folks,
I wonder if anyone can give me some help converting a Salome mesh to Fluent format. I tried doing it using Gmsh, it apparently does the job (unv to msh) but it seems that the group labels are not being saved. I will appreciate if anyone can provide guidance on this, Best regards |
|
![]() |
![]() |
![]() |
![]() |
#2 |
New Member
Sagar
Join Date: Sep 2017
Location: Surat, India
Posts: 10
Rep Power: 7 ![]() |
Hi,
I have tried with 3D mesh. First export "a.unv" mesh file from Salome. Then use "ideasUnvToFoam.exe a.unv" in OpenFOAM. It will convert unv mesh file to OpenFOAM mesh with all boundary group as patches. After converting mesh and checking quality of mesh use "foamMeshToFluent.exe" command to convert it into .msh format with all boundary patches. It will work. But I am stuck up with how to export 2D Mesh from Salome to Fluent because OpenFOAM is not dealing with 2D mesh. |
|
![]() |
![]() |
![]() |
![]() |
#3 | |
Senior Member
Join Date: Mar 2018
Posts: 115
Rep Power: 6 ![]() |
Quote:
|
||
![]() |
![]() |
![]() |
![]() |
#4 |
New Member
Sagar
Join Date: Sep 2017
Location: Surat, India
Posts: 10
Rep Power: 7 ![]() |
Thank you Evren Linda.
I use to work with OpenFoam and I rarely find some stuff which requires fluent mesh conversion. I followed the above (wrong) practice of multiple conversion which was actually not required for converting Salome mesh to fluent. But you are right. We can directly read ".unv" file into fluent. |
|
![]() |
![]() |
![]() |
![]() |
#5 | |
Senior Member
Join Date: Mar 2018
Posts: 115
Rep Power: 6 ![]() |
Quote:
I've asked a similar question here: [Request] OpenFOAM mesh to 2D Ansys fluent mesh |
||
![]() |
![]() |
![]() |
Tags |
fluent, mesh, salome |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Fluent reading wrong mesh type | Tommorrice | ANSYS Meshing & Geometry | 1 | March 15, 2016 18:32 |
[mesh manipulation] Importing Multiple Meshes | thomasnwalshiii | OpenFOAM Meshing & Mesh Conversion | 18 | December 19, 2015 19:57 |
[ICEM] export hexa mesh to fluent | Wieland | ANSYS Meshing & Geometry | 37 | January 23, 2013 04:27 |
[Gmsh] 2D Mesh Generation Tutorial for GMSH | aeroslacker | OpenFOAM Meshing & Mesh Conversion | 12 | January 19, 2012 04:52 |
fluent add additional zones for the mesh file | SSL | FLUENT | 2 | January 26, 2008 12:55 |