how can i generate the best mesh for this geometry ???

n7ma · July 28, 2017, 14:15

Hey everyone
i have a box that a pipe passes through it.
both side of the pipes are Inlets.
and theres a hole (1mm Diameter ) on the pipe that air flowes to the box.
solution should continue until the box filles and pressure of pipe and box be equal.
please help me with mesh gerenating , im beginner , every help can be usefull for me , thanks a lot

the Geometry File :
https://ufile.io/tqvzg

image of Geometry :

https://img2.brain4.photobox.com/166...ab94601bd0.jpg

ali.ikhsanul · August 2, 2017, 12:57

Do you have step or stp file of the geometry?
I can help meshing the geometry by using snappyHexMesh, but first I need step file instead to import in SALOME.

July 28, 2017, 14:15	how can i generate the best mesh for this geometry ???	#1
n7ma New Member Nima Join Date: Jul 2017 Posts: 3 Rep Power: 8	Hey everyone i have a box that a pipe passes through it. both side of the pipes are Inlets. and theres a hole (1mm Diameter ) on the pipe that air flowes to the box. solution should continue until the box filles and pressure of pipe and box be equal. please help me with mesh gerenating , im beginner , every help can be usefull for me , thanks a lot the Geometry File : https://ufile.io/tqvzg image of Geometry : https://img2.brain4.photobox.com/166...ab94601bd0.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Assembly mesh "misses" gaps in geometry	vjbhatt	ANSYS Meshing & Geometry	2	September 25, 2014 02:52
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
[ICEM] How to generate unstructure mesh of this geometry?	llrr	ANSYS Meshing & Geometry	6	May 28, 2013 03:42
[snappyHexMesh] Layers:problem with curvature	giulio.topazio	OpenFOAM Meshing & Mesh Conversion	10	August 22, 2012 09:03
unstructured vs. structured grids	Frank Muldoon	Main CFD Forum	1	January 5, 1999 10:09

August 2, 2017, 12:57		#2
ali.ikhsanul New Member Ali Ikhsanul Qauli Join Date: Oct 2016 Location: Indonesia Posts: 11 Rep Power: 9	Do you have step or stp file of the geometry? I can help meshing the geometry by using snappyHexMesh, but first I need step file instead to import in SALOME.