CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Mesh Generation & Pre-Processing (https://www.cfd-online.com/Forums/mesh-generation/)
-   -   Hexa Mesh Generation for an elbow with 3 entries and 1 outlet (https://www.cfd-online.com/Forums/mesh-generation/207007-hexa-mesh-generation-elbow-3-entries-1-outlet.html)

amirlachraf September 21, 2018 07:12

Hexa Mesh Generation for an elbow with 3 entries and 1 outlet
 
Hello,
I have been working with Salome_Meca for while now, with the geometry of an elbow with 3 inlets and 1 outlet, and I had a difficulty in getting a Hexahedral mesh for the geometry, and do the refinement toward the walls.



I've tried sub-mesh, 3D Extrusion, divide the geometry do the mesh the re-group the mesh to solve the problem but it wasn't working at all.



How to I solve this issue? :confused:


All times are GMT -4. The time now is 23:24.