Mesh generate for inducer

montazar · January 16, 2019, 14:22

Hi Guys...Can anyone please give me a guidance about meshing of geometry like one I attached here?(You can download it here: http://s000.tinyupload.com/?file_id=...62296441397526)
I wan to know which one of Structured Or Unstructured Meshing method's you recommend to me?

Thanks A lot
Milad Asiyaban
Email: milad_asiyaban@gmail.com

colinda1 · January 21, 2019, 04:10

Structured meshing would be preferable in this case but it may take some time depending on the tool used. Structured mesh generators dedicated to turbomachinery configurations save a lot in such case to get a high-quality mesh quickly. As an alternative unstructured meshing can be considered. In that case, I would recommend a full hexahedral mesh.

Best regards,
Colinda

January 16, 2019, 14:22	Mesh generate for inducer	#1
montazar New Member laadri Join Date: Mar 2016 Posts: 3 Rep Power: 10	Hi Guys...Can anyone please give me a guidance about meshing of geometry like one I attached here?(You can download it here: http://s000.tinyupload.com/?file_id=...62296441397526) I wan to know which one of Structured Or Unstructured Meshing method's you recommend to me? Thanks A lot Milad Asiyaban Email: milad_asiyaban@gmail.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
decomposePar problem: Cell 0contains face labels out of range	vaina74	OpenFOAM Pre-Processing	37	July 20, 2020 05:38
[ICEM] How to generate this kind of mesh?	mingersai	ANSYS Meshing & Geometry	51	February 16, 2017 07:32
How to generate a Cartesian 2D Mesh using MATLAB?	sujithsubramanian	Main CFD Forum	0	March 9, 2014 15:46
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 04:24
[snappyHexMesh] SnappyHexMesh not generate mesh first time	mavimo	OpenFOAM Meshing & Mesh Conversion	4	August 26, 2008 07:08

January 21, 2019, 04:10		#2
colinda1 Senior Member Colinda Join Date: May 2012 Location: Brussels Posts: 151 Rep Power: 13	Structured meshing would be preferable in this case but it may take some time depending on the tool used. Structured mesh generators dedicated to turbomachinery configurations save a lot in such case to get a high-quality mesh quickly. As an alternative unstructured meshing can be considered. In that case, I would recommend a full hexahedral mesh. Best regards, Colinda