CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

question about grid convergence study(boundary layer)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 8, 2023, 08:11
Default question about grid convergence study(boundary layer)
  #1
New Member
 
eunchong
Join Date: Feb 2022
Posts: 8
Rep Power: 4
dmschd153246 is on a distinguished road
hi dear fourum
i have a small question about gird convergence study

If what I know is right in grid convergence study
Wall Y+ or initial cell spacing from wall for boundary layer resolution should be same for all levels of grid (i.e. Coarse, Medium, Fine, etc.).
(They offer only the first cell size)

so this is my question
Is there no need to match the total layer thickness or expansion ratio and the number of layers in coarse, medium, fine gird system?

I would really appreciate it if you could give me the answer.
dmschd153246 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[snappyHexMesh] Help with Snappy: no layers growing GianF OpenFOAM Meshing & Mesh Conversion 2 September 23, 2020 09:26
[snappyHexMesh] Adding layer 3d wing (y+=1) Dorian1504 OpenFOAM Meshing & Mesh Conversion 4 November 10, 2017 01:56
Grid Convergence Study in Cold Plasma Jet Mourousias Main CFD Forum 2 July 9, 2016 15:14
Grid Convergence Articles ryzd Main CFD Forum 0 February 10, 2012 15:40
errors Fahad Main CFD Forum 0 March 23, 2004 14:20


All times are GMT -4. The time now is 11:47.