CFD Online Logo CFD Online URL
Home > Forums > Special Topics > Mesh Generation & Pre-Processing

ICEM | Issue generating hybrid mesh twisted wing

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   June 14, 2019, 19:03
Question ICEM | Issue generating hybrid mesh twisted wing
New Member
Matteo Tesini
Join Date: Jun 2019
Posts: 1
Rep Power: 0
AeroMT is on a distinguished road
Hello everyone,

I am a student, completing a Master in Aerodynamics and for my Thesis I have to study an inverted twisted wing in ground effect. I am studying the mesh independence, but I am having a problem. I have generated 4 meshes with different number of cells (the last has 7 million cells) but when I try to decrease the maximum size value of the model surfaces, firstly the unstructured mesh is not displayed on the model and secondly the prism layer (in order to generate the hybrid mesh) is not generated.

I attach few images to better understand the case, the green part is my model while the blue surface is the ground. It can be seen that the model is not meshed whereas the ground it is. Can you help me? I do not know whatís going on, and itís even more weird the fact that this problem occurs only at certain small surface values.

I hope to have explained my issue, if not please ask me more info.

Thank you.
Attached Images
File Type: jpg After_Unstructured_mesh.jpg (178.3 KB, 2 views)
AeroMT is offline   Reply With Quote


hybrid mesh, icem 19.0, mesh 3d

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
FFD shape deformation for 3D wing not changing the mesh lwc24 SU2 Shape Design 5 August 1, 2019 15:17
ICEM Wing Mesh Problem andrewmichael Mesh Generation & Pre-Processing 0 March 4, 2018 17:30
[ICEM] surface mesh merging problem everest ANSYS Meshing & Geometry 44 April 14, 2016 06:41
[ICEM] Generating Mesh for Decoupled Mesh Motion with ICEM Julian K. ANSYS Meshing & Geometry 0 October 18, 2011 15:54
ICEM - mesh near wing trailing edge Joao Lourenco CFX 5 August 30, 2007 17:20

All times are GMT -4. The time now is 04:18.